Step 5 Checking Operations With The Diagnosis Program; What Is The Diagnosis Program; Check Method - Contec GP-IB(CB)F User Manual

Step 5 Checking Operations with the Diagnosis
Program
Use the diagnosis program to check that the PC card and driver software work normally, thereby you can
confirm that they have been set up correctly.

What is the Diagnosis Program?

The diagnosis program diagnoses the states of the PC card and driver software.
It can also be used as a simple checker when an external device is actually connected.
Using the "Diagnosis Report" feature reports the driver settings, the presence or absence of the PC card,
I/O status, and interrupt status.

Check Method

Perform the transmit/receive test and check the execution environment with the PC Card connected to
the remote device.
Before diagnosis, check the address of the remote device. Prepare the user's guide and command
reference for the remote device as required (to perform testing smoothly).
Starting the Diagnosis Program
Click the [Diagnosis] button on the device property page to start the diagnosis program.
GP-IB(CB)F, GP-IB(CB)FL
2. Setup
25