Advertisement
Advertisement
Table of Contents
Summary of Contents for PistenBully 100
- Page 1 Operating manual Passenger Cab...
- Page 2 Kässbohrer Geländefahrzeug AG Kässbohrerstraße 11 D-88471 Laupheim Printed in Germany Copyright ® Not to be reprinted, translated or duplicated either wholly or in part without written permission. Technical details might not necessarily be exactly as described or illustrated in this operating manual.
-
Page 3: Table Of Contents
– Log book – Operating manual, diesel engine Technical data ....6 – Operating manual, PistenBully – Operating manual, Webasto – Maintenance instructions AFETY Safety instructions. -
Page 4: Introduction
Handling, maintenance of the passenger cab Imminent danger to life and limb unless the corre- The PistenBully operating manual is the primary manual. sponding precautionary measures are taken. It must be read and understood first. -
Page 5: Technical Customer Service
+49(0)7392/900-118 Area Manager TKD Mr. Bohnet +49(0)7392/900-116 Area Manager TKD Mr. Dehm +49(0)7392/900-117 Fax +49(0)7392/900-100 24-hour service emergency number: Phone. +49 171/7124096 Spare Parts department (ETV) Head of ETV Mr. Heim +49(0)7392/900-107 +49(0)7392/900-130 Spare parts distribution (ETV) emergency number: Tel. 0171/3732230... -
Page 6: Echnical Data
ECHNICAL DATA Dimensions: Pisten Bully 200 / 300 200 / 300 200 / 300 400 / 600 400 / 600 400 / 600 Cab for 5 persons 8 persons 10 persons 15 persons 20 persons Height approx. 1,730 mm approx. 1,730 mm. approx. 1,730 mm approx. 1,730 mm approx. 1,730 mm Width approx. -
Page 7: Safety Instructions
AFETY INSTRUCTIONS Intended use ........7 Danger zone, persons......7 Servicing ..........9 Passenger cab.en 7/20... - Page 8 Public roads may only be crossed of the PistenBully. directly with the approval of the The door to the passenger The PistenBully is designed relevant authority. compartment must be completely exclusively for: Offset crossing using an approved closed. A warning tone sounds if - the preparation of ski trails.
- Page 9 ROPS-certified structure! - Park the PistenBully on a level sur- Use the hammer to break the Ribs and structure must not be face. passenger-side window and drilled into or welded.
- Page 10 AFETY INSTRUCTIONS ARNING SIGNS The instructions on the warning signs on the PistenBully and any attachments must be complied with! Replace damaged or lost warning MERGENCY HAMMER SIGN signs immediately! Attached: In the driver's cab KGG- No. 8.766.027.053...
- Page 11 AFETY INSTRUCTIONS IESEL FUEL HEATING SIGN Attached: Passenger cab tank filler neck KGG- No. 8.762.670.053.0 Text: Diesel fuel EN 590, but sulphur content <10 ppm or RME biodiesel DIN V 51606 Passenger cab.en 11/20...
- Page 12 OTES 12/20 Passenger cab.en...
-
Page 13: Use
Switch, passenger cab ......14 Heating, passenger cab ....... 14 Retracting / extending the access ladder ..........16 Mounting the passenger cab ....17 Passenger cab.en 13/20... -
Page 14: Heating, Passenger Cab
Heating, passenger cab Filling the fuel tank for the passenger cab heating The heating for the passenger cab is enabled from the driver's seat. Only when this has been done can the WARNING! heating in the passenger cab be switched on. Do not allow fuels to splash onto the skin Enabling the passenger cab heating (wear protective gloves, change clothes if... - Page 15 Passenger cab intercom Telephone Occupants of the passenger cab can speak to the driver. 15/20 Passenger cab.en...
- Page 16 Passenger exit Extending the access ladder Open both fasteners and fully extend the access ladder. Locking bolt 8 must engage. Open the cab door and allow passengers to climb out. CAUTION! Danger of slipping on the access ladder while Locking device engaged Access ladder climbing in or out.
-
Page 17: Mounting / Removing Passenger Cab
Mounting / removing the passenger cab WARNING! Make sure there is no-one in the danger zone! Secure the pivoting area before removing the cab. Position support Hexagon bolt bearings M12 x 30 mm The power cable will be pinched if the passenger cab is placed on the ground. - Page 18 Hook crane attachment loops into the 4 suspension eyes. Lift passenger cab and swing it over the loading platform. Slowly lower the passenger cab. Insert hexagon bolt 3 into the bearing support. WARNING! Danger of crushing when lowering the cab! Insert bolt Maintain a safe distance while the cab is...
- Page 19 Perform inspection of the Webasto heating Refer to the operating manual for the Webasto heating for details. Oil door hinges every 100 hours Lubricate hinge of access ladder every 100 hours Check tightening torques every 100 hours 19/20 Passenger cab.en...
Need help?
Do you have a question about the 100 and is the answer not in the manual?
Questions and answers