2 Installation
Initial Settings Procedures Using Control Panel
This section describes the initial settings related to the Smart Card solution, and how
to set them on the machine's control panel.
Check the system clock .............................................................................................................. 25
Set Authentication ......................................................................................................................... 26
Set Use of Smart Card .................................................................................................................. 28
Set Access Control ........................................................................................................................ 29
Set Private Charge Print ............................................................................................................... 32
Authentication for entering the System Administration mode
1
Press the <Log In/Out> button.
2
Enter "admin" with the keyboard displayed.
This is the factory default ID.
When a passcode is required, select [Next]
and enter "1111" from the keyboard.
3
Select [Enter] on the touch screen.
4
Select [Tools].
24
<Log In/Out> button