Additional Functions Featured By Aquahome 20-N - Viessmann AQUAHOME 20-N Installation And Operation Manual

Immediate regeneration
Press the RECHARGE button (see
figure no. 3 and 4) and hold it until the
display screen shows flashing caption
reading RECHARGE NOW or
RECHARGE. The first phase of the
regeneration process will begin - filling
the brine tank with water. Subsequent
phases will be activated automatically.
Upon completion of the regeneration
process water softening capacity of
the device will be restored.
Regenerate tonight
Press the RECHARGE button (see
figure no. 3 and 4). The RECHARGE
TONIGHT caption will begin flashing.
The regeneration process will begin
on the preset hour (2.00 AM as
default). In order to cancel the
regeneration instruction press the
RECHARGE button again (but do not
hold it). The RECHARGE TONIGHT
caption will disappear from the display
screen.
 Important notice!
B. Additional functions featured by Aquahome 20-N

SALT EFFICIENCY (Lower
salt consumption mode),

CLEAN
FEATURE
(cleaning
function),
necessary. Such additional regeneration
process is required when:

actual water usage exceeds planned
water usage (for example due to guests' visit
in the household). Such situation poses a
threat that the ion exchange capacity of the
resin will be used before the device activates
the regeneration process automatically,

the brine tank is short of salt (the brine
tank was not refilled with salt) - the brine
tank must be immediately topped up with
salt

it is the first operation of the device
(commissioning of the device).
17
If the "Clean Feature" is set ON, the
normal regeneration process is
preceded by a cleaning backwash
and rinse (in case of Aquahome 30-N
the words "CLEAN" and "Bkwsh" or
"Rinse" will flash on the display
screen, along with the minutes of the
clean cycle remaining).
 Important notice!
During the course of the regeneration
process the device will not generate
softened water.

CLEAN FEATURE MINUTES
(Duration of cleaning),

MAXIMUM DAYS BETWEEN
REGENERATIONS
(Maximum time period between
regenerations in days
during water uptake idle