SunPower SPR-E-Flex-110 Safety And Installation Instructions

Flexible solar panel

Table of Contents

Download this manual

Safety and Installation Instructions

United States and Canada

This document applies to all SunPower modules

listed in Table 1.

Contents of this manual are subject to change without notice.

For the latest US & Canada manual please refer to

www.sunpower.com/PVInstallGuideFlexModules

SunPower Corporation

www.sunpower.com

Document 524958 REV A

Table of Contents

Need help?

Do you have a question about the SPR-E-Flex-110 and is the answer not in the manual?

Page 1 Safety and Installation Instructions United States and Canada This document applies to all SunPower modules listed in Table 1. Contents of this manual are subject to change without notice. For the latest US & Canada manual please refer to www.sunpower.com/PVInstallGuideFlexModules SunPower Corporation www.sunpower.com...
Page 2 PV Modules subjected to: (1) misuse, abuse, neglect or accident; (2) alteration or improper installation (improper installation includes, without limitation, installation or array that does not comply with all SunPower installation and wiring instructions (as may be amended and updated from time to time at SunPower’s sole discretion);...
Page 3 Avoid shading either panels. SunPower does not recommend connecting these panels in parallel if shading will occur. For models not shown here, please contact SunPower technical support or visit www.sunpower.com. Electrical parameters are measured at Standard Test Conditions (STC).
Page 4 IP67 for the box. Modules may be mounted using the grommet holes as attachment points or using an adhesive on the panel backside. SunPower makes no claim to preferred attachment method nor to the safety of the attachment.

Spr-e-flex-100