Maintenance - Worcester DT10RF Instruction Manual

8_716_115_493a 9/2/09
Digistat Programmer
Part number 8 716 114 461 0
DT10RF Receiver
Part Number: 8 716 106 667 0
DT10RF PROGRAMMER
INSTRUCTION MANUAL
8 716 115 493a (02.2009)
09:46 Page 35

Maintenance:

The Transmitter (Digistat Programmer or Optimising
Programmer) requires no maintenance.
The outer casing can be wiped clean using a dry
cloth. DO NOT use polish or detergents.
These units can not be serviced.
Should the existing unit fail to function correctly,
check:
Receiver times and program settings are correct
RF signal link is set up
Transmitter batteries are the correct type, fitted
correctly and are not exhausted.
Fit new batteries if in doubt.
DIGISTAT / DT10RF RECEIVER
MAINTENANCE
OPERATING & INSTALLATION
INSTRUCTIONS
31