Slow and Quick Motion
Slow and quick motion (S&Q) increases the recording frame rate of the camera. Standard frame
rate is 25 frames per second (FPS). This only works in progressive. The camera must in using the
XAVC-I codec and the maximum frame rate is 150fps. Press the S&Q button on the left hand side
of the camera to enable S&Q mode. Once S&Q is active it defaults to 60FPS.
This indicates that S&Q has been activated on the right you see 60FPS
To change the frame rate, go to Menu > Recording > S&Q Motion
To get beyond 60FPS you must go to high frame rate and activate full scan then you can change the frame rate.
28
October 2016 v4
Need help?
Do you have a question about the PXW-FS7 and is the answer not in the manual?
Questions and answers