Fujitsu AUYG07LVLA Design & Technical Manual page 211

 Function setting procedure
1. Connect the power supply of the outdoor unit.
2. To enter the function setting mode, while holding down the FAN and the SET TEMP.
tons, press the RESET button.
3. Press the SET TEMP.
with the indoor unit. By selecting the appropriate custom code, the communication between
the indoor unit and the wireless remote controller become possible.
4. For confirming the custom code, press the TIMER MODE button to send the code to the in-
door unit.
5. Press the MODE button to enter the function setting mode.
6. Select the function number by pressing the
Each time the MODE button is pressed, it switches between the left digit and the right digit.
FAN
SET TEMP. ( )
RESET
or buttons to select the custom code that matches the setting
Custom code
( - - - )
The initial setting is " "
2 short beeps
or the
- 203 -
Function setting
mode display
button.
Change digit
but-