Panasonic KX-TDA30 Installation Manual page 162

4.1 Troubleshooting
Note
As a result of Step 2, all the programmed data will be cleared.
3.
If the Hybrid IP-PBX still does not work:
a.
Unplug the Hybrid IP-PBX.
b.
Slide the System Clear Switch towards the Reset Button.
c.
Plug in the Hybrid IP-PBX after 5 min.
d.
Press the Reset Button.
e.
Set the System Clear Switch back to the normal position while the RUN indicator is
flashing (within approximately 10 s).
162 Installation Manual