Page 1
Suzhou Bafang Electric Motor DEALER MANUAL Science-Technology Co., Ltd No. 9 Heshun Rd MAX Drive System Suzhou Industrial Park 215122, Suzhou China bf@szbaf.com www.szbaf.com...
Page 2
Connection of the Headlight Cable to the Drive Unit 3.5 Connection of the Headlight to the Drive Unit 4 Chain Cover Installation 4.1 Installation of the Front Chainwheel......30 4.2 Chain Cover Installation (optional)....... 32 4.3 Crank Installation ............39 DEALER MANUAL MAX DRIVE SYSTEM...
Page 3
• If any leaked fluid gets on your skin or clothes, wash it off immediately with clean water. The leaked fluid may damage your skin. • Store the battery in a safe place out of the reach of children and pets. DEALER MANUAL MAX DRIVE SYSTEM...
If the battery is completely discharged, charge it assoon as possible. If you do not charge the battery, it will be da- maged. Battery Level Display Switch DEALER MANUAL MAX DRIVE SYSTEM...
BATTERY (BT C01) Battery Installation battery pack lock battery Insert the battery pack from the tail of the carrier onto the rail. Push it to the front until you hear it snap into place in the battery pack lock. Please make sure the battery pack is locked to prevent the battery from becoming detached while riding.
• Waterproof Grade: IP65 • Storage Humidity: 30 % – 70 % Appearance and Dimensions 6.2.1 Materials and Dimensions • The shell is made of PC. The liquid crystal display is made of hardened PMMA. DEALER MANUAL MAX DRIVE SYSTEM...
Walk assistance of charge cycles exceeds the set value. A warning Headlight indication: only shows when headlight will also be displayed when the accumulated total or backlight are on riding distance exceeds the set value. DEALER MANUAL MAX DRIVE SYSTEM...
6.3.3 Key Definitions Distance mode: display of the single-trip distance TRIP and the total distance TOTAL Battery level: 10-segment battery indication; the voltage that each segment represents can be customized down headlight on/off mode DEALER MANUAL MAX DRIVE SYSTEM...
Level 1, the highest Level 5. When the display is on, the default mode is Level 1. When there is no numeric mode display, there is no power assistance. Switching between displays Selecting the level for motor assistance DEALER MANUAL MAX DRIVE SYSTEM...
Page 11
Switch between power assistance and walk assistance mode Display backlight, headlight and taillight There are 5 levels of backlight brightness that can be selected by the user. DEALER MANUAL MAX DRIVE SYSTEM...
25 % ≤ C < 35 % Parameter Setting 6.5.1 Items to be Set: Data reset km/mile Light sensitivity Display backlight brightness Automatic off time Maintenance warning settings Input of the password Wheel diameter selection Setting speed limit DEALER MANUAL MAX DRIVE SYSTEM...
When the speed field displays S7, press switch between km/h and mph, or to set km or mile. After this setting, briefly press (< 0.3 seconds) to enter the setting interface of light sensitivity. DEALER MANUAL MAX DRIVE SYSTEM...
After this setting, briefly press (< 0.3 seconds) to enter the setting interface of backlight brightness. After this setting, briey press (< 0.3 seconds) to enter the setting interface of automatic off time. DEALER MANUAL MAX DRIVE SYSTEM...
Page 15
• When the number of battery charge cycles ex ceeds 100 (can be customized by the manufactu rer), the display will the symbol When the display is started up, the sign for battery will DEALER MANUAL MAX DRIVE SYSTEM...
Page 16
DISPALY (DP CO7.UART) flash for 4 seconds, indicating that maintenance is necessary. • The maintenance alert function can be disabled: main - settings maintenance alert (MA) tenance alert (MA) 0. (Maintenance alert can also be set via a computer. This requires a USB connection.
Need help?
Do you have a question about the MAX Drive System and is the answer not in the manual?
Questions and answers