Advanced Configuration; Configuration Using Tankmaster Winsetup - Emerson Rosemount 2410 Reference Manual

Configuration
March 2017
4.5

Advanced configuration

The installation wizard in TankMaster Winsetup comprises a basic configuration of the Rosemount 2410.
There are more options available in case further configuration is needed:
Primary/Secondary Bus configuration

Up to ten "virtual" Relay Functions

Hybrid Density

Delta Level

Analog Output

Analog Input / HART Slave

See
Appendix C: Advanced Configuration
4.6

Configuration using TankMaster WinSetup

A Rosemount 2410 Tank Hub can easily be installed and configured by using the TankMaster Winsetup
configuration program. The WinSetup installation wizard guides you through the basic configuration
needed for starting up a Rosemount 2410.
See the Rosemount Tank Gauging System Configuration Manual (Document no. 00809-0300-5100) for
more information on using the TankMaster WinSetup software to configure a Rosemount Tank Gauging
system and a Rosemount 2410 Tank Hub.
See also the Rosemount TankGauging Wireless System Reference Manual (Document no.
00809-0100-5200) for information on how to set up a WirelessHART system.
1, Analog Input and HART Slave functions are configured in the Properties window of Auxiliary Tank Device (ATD), see
HART® slave device" on page
62
(1)
160.
for more information.
Reference Manual
00809-0100-2410, Rev DA
"Configuration of analog input /
Configuration