Northern Diver Varilux Travel II User Manual

80 - 1000 LUMENS | RECHARGEABLE
INCLUDED
- 26650 battery x 1
- Battery charger x 1
- Car adapter x 1
- Spare O ring x 1
- Tail cap/handle lubricant x 1
SPECIFICATION
Material: Anodised aircraft 6061 aluminium
Colour: Silver/grey
LED: 1x CREE XM-L2
LED lifespan: 100000 h
Brightness: 1000 lm
Light colour: White
Mode: High/dimming
Battery: 26650 3.7 V, 4000 mAh
Switch design: Magnetic induction switch
Lens: Coated glass lens
Size: 161 x 45 mm (length x head diameter)
Weight (torch): 232 g
Weight (torch and batteries): 324 g
STANDARD HIGH POWER
1000
LUMENS
2 hours
1000 m (beam distance)
30000 cd (peak beam intensity)
1 m (impact resistance)
100 m (depth rating)
NOTICE
This data may vary depending on environmental conditions.
STRUCTURE
Induction switch
See paragraph 2 under 'operation',
ref charge warning light.
Head
Handle
www.ndiver.com. Telephone: +44 (0) 1257 25 44 44. Email: info@ndiver.com. Write to: East Quarry, Appley Lane North, Appley Bridge, Wigan, WN6 9AE, UK.
Travel II
MID POWER LOW POWER
80 - 1000 80
LUMENS LUMENS
2 - 30 hours 40 hours
Tail cap
Battery
USER MANUAL
WARNING
1. The battery must be inserted positive end first. Do not insert the battery the
wrong way.
2. Do not use different batteries to the one provided.
3. Do not use the battery if it is damaged.
4. When storing the torch, unscrew the handle or the tail cap to ensure the
power is cut off.
5. After every dive, clean the torch with fresh, clean water and dry prior to
storage. Salt water residue can corrode the torch surface.
6. Ensure that the tail cap and handle are lubricated regularly. A container of
lubricant comes with your torch.
7. Avoid any impact on the glass lens.
8. Do not shine the light directly into eyes.
BATTERY INSTALLATION
Open the torch by unscrewing the handle or the tail cap by hand. Insert the
battery positive end first (facing the switch), taking care not to disturb the
O rings. Do not insert the battery the wrong way. Reclose the torch.
OPERATION
1. The torch is operated by the top-mounted induction switch. Press once to
switch the light on. Now you can press and hold to gradually decrease the
output. Release the switch when you reach the desired output. Press once to
switch the light off.
2. When the torch is turned on, the ring around the switch will emit a constant
green light. When the torch is turned off, the green light will flash every 5
seconds. This is to help the user locate the torch, for example in darkness or if it
is dropped. The light will turn red when approximately 20% of the battery's
charge is remaining. When the torch is not in use, the handle or the tail cap
should be unscrewed and the battery should be removed.
CHARGING
Your charger comes with instructions.
Ensure that you read and understand them prior to use.
WARRANTY
1. Your torch is covered by a full 12 month warranty.
2. If a fault occurs within 14 days due to a manufacturing defect, your torch
will be replaced (proof of purchase required).
3. After 14 days and within 12 months of purchase, your torch will be
repaired or replaced (excludes accidental damage or damage caused by
misuse).
4. Outside the 12 month warranty period, your torch will be repaired at cost
(if repairable).
5. In all cases, inward and outward shipping will be the customer's responsibility.
The warranty does NOT cover the following:
1. Damage caused by disassembly or modification.
2. External cosmetic damage caused by normal use or misuse.
3. Damage caused by incorrect battery insertion or battery leakage.
If you have any queries, please contact your local Northern
Diver distributor. Alternatively, feel free to contact us.
Our contact details are below.