Related Manuals for JUGS Jr.
Summary of Contents for JUGS Jr.
- Page 1 OWNER’S MANUAL Instructions for the JUGS Jr. & JUGS Softball ™ Pitching Machine Part No. Z7200 SAVE THIS MANUAL...
- Page 2 ATTENTION, Coaches and Operators of the JUGS Jr and JUGS Softball Pitching Machine: This manual must be kept with the pitching machine AT ALL TIMES. Each coach and/or operator must read and understand the instructions in this manual bEfORE USING the JUGS Jr and JUGS Softball Pitching Machine.
-
Page 3: Table Of Contents
Using JUGS for Field Hockey ........25... - Page 4 JUGS pitching machines, making them easy to operate and maintain. With proper care, your JUGS pitching machine will give you many years of enjoyable service. At JUGS, we are committed to providing our customers with safe, dependable products.
-
Page 5: Product Safety Signs And Labels
Product Safety Signs & Labels Safety Alert Symbols Safety Alert Symbols indicate DANGER, WARNING or CAUTION. These symbols may be used in conjunction with other symbols or pictographs. Failure to obey a safety warning will result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of electric shock and personal injury. - Page 6 Safety Signs and Labels Carefully read all safety sign decals affixed to machine before operating your JUGS pitching machine. See examples below. ▲ DANGER -MECHANICAL HAZARD- READ ALL OPERATING AND SAFETY INSTRUCTIONS BEFORE USING THIS MACHINE. ONLY INSTRUCTED PERSONNEL SHALL OPERATE THIS MACHINE.
-
Page 7: Rules For Safe Operation
Rules for Safe Operation WARNING: JUGS pitching machines are intended for use by operators who are at least 18 years of age and who have been instructed in their use. WARNING: Do not attempt to operate this machine until you have read thoroughly and understand completely all instructions, safety rules, machine labels, etc. - Page 8 • Use the right ball. Use only JUGS dimpled style, Lite-Flite, Softie, one-ounce polyball baseballs, high-quality leather baseballs (9-inch Wilson A1010 equal or better), or tennis balls in this machine. • Inspect extension cords periodically and replace if damaged. • Use the proper extension cord. Make sure your extension cord is in good condition.
- Page 9 • Replacement parts. All repairs, whether electrical or mechanical, should be made by a qualified JUGS service technician. When servicing, use only JUGS replacement parts. • Do not operate this machine under the influence of drugs, alcohol, or any medication.
-
Page 10: Electrical
WARNING: Do not allow your familiarity with the machine to cause you to be careless. Remember that a careless fraction of a second is enough time to inflict severe injury to yourself or others. SAVE THIS MANUAL. Refer to it often and use it to instruct other users. Do not loan your pitching machine to anyone who has not been instructed in its use. -
Page 11: Electrical Connection
Electrical Connection Your JUGS pitching machine is powered by a 90 volt motor(s). Do not operate this machine on direct current (DC). A substantial voltage drop will cause a loss of power and the motor will overheat. If the machine does not operate when plugged into an outlet, double check the power supply. -
Page 12: Terminology
Terminology Straight Leg Assembly Figure 3... - Page 13 Terminology Curved Leg Assembly Figure 4...
- Page 14 Terminology Baseball, Lacrosse and Field Hockey Softball feed Chutes Top of Machine High Profile Low Profile Curved Leg Straight Leg Figure 5...
-
Page 15: Unpacking
Assembly JUGS is shipped with the base secured tightly to the “top” of the machine. 1. Separate the “top” from the base casting. a. Loosen the horizontal T-clamp. - Page 16 Assembly Your JUGS Jr. pitching machine comes with two sets of legs depending on how you will use it. Use the straight legs for baseball or lacrosse. Use the curved set of legs for softball or field hockey. Please read carefully.
- Page 17 3. Re-connecting the “Top” of JUGS onto the base Assembly: a. Loosen the horizontal T-clamp. b. Place the “top” of JUGS onto the shaft of the base assembly. (see Figure 10). Turn the “top” of JUGS so the horizontal T-clamp is lined up directly OVER the red dot at the base.
- Page 18 Remove the bolts holding the rubber pad bracket to the rotating plate. b. Select the correct feed chute for your intended use. Your JUGS comes with two feed chutes: the larger one is for softball, the smaller is for baseball, lacrosse and field hockey (see Figure 11).
-
Page 19: General Operating Instructions
Operation GENERAL OPERATING INSTRUCTIONS IMPORTANT: Always position the pitching machine so that two legs are facing the pitching screen and batter, and one leg is facing back, towards the operator, except as noted in Figure 14, page 23. 1. Be sure the control switch is in the “OFF” position. 2. - Page 20 Operation Figure 13. Control Panel JUGS Jr. Pitching Machine Speed Chart Dial Setting Approx. M.P.H. (Baseball) Figure 14 NOTE: The above speeds are approximate miles per hour (MPH) taken at a distance of 45 feet.
-
Page 21: Pitching Baseballs Or Softballs To Batters
Operation Pitching to batters Follow all safety performance instructions in this manual. The following feeding instructions should be used to insure accurate and efficient operation of the JUGS Pitching Machine. IMPORTANT PITCHING MACHINE fEEDING INSTRUCTIONS: 1. When feeding the machine with leather balls, hold the ball the same way every time. - Page 22 NOTE: We suggest that each operator spend a couple of hours experiment- ing with the JUGS Jr. pitching machine. (You may want to jot down the wheel position and speed dial settings in the space provided on pages 29-30 for future reference).
- Page 23 15. To regulate the direction of the pitch: • Loosen the horizontal T-clamp. • Grasp the chute handle and move the “top” of the JUGS sideways until the chute is aimed at the desired target. • Hand tighten horizontal T-clamp.
- Page 24 (This is the exact opposite of the position of the legs when you are throwing straight balls. See Figure 15). One JUGS leg should be pointing at home plate when throwing drop balls. When throwing risers, one JUGS leg should be pointing at second base.
-
Page 25: Fielding Practice For Baseball Or Softball
Operation fIELDING PRACTICE fOR bASEbALL OR SOfTbALL 1. VERY IMPORTANT: Before you place the ball in the feed chute, you should look up at the fielder and make absolutely sure the fielder is watching you and is ready to receive the ball. It is extremely important that you make sure that the immediate area in front of the pitching machine and the flight path of the ball is clear before you feed the balls into the pitching machine. -
Page 26: Using Jugs For Lacrosse
Operation USING JUGS fOR LACROSSE: 1. Follow the assembly instructions for the “High Profile” setup as shown in Figure 9 on page 15, or use straight legs. 2. Install the small diameter feed chute for lacrosse (see Figure 11), and position the rubber pad bracket until the bolt holes line up with the lower set of bolt holes in the rotating plate (see Figure 12). -
Page 27: Using Jugs For Field Hockey
Operation USING JUGS fOR fIELD HOCKEY: 1. Follow the assembly instructions for the “Low Profile” setup as shown in Figure 8 on Page 15. 2. Install the small diameter feed chute for field hockey (see Figure 11), and position the rubber pad bracket until the bolt holes line up with the lower set of bolt holes in the rotating plate (see Figure 12). -
Page 28: Transporting
3. Lower JUGS to a horizontal position, with the feed chute facing upward. 4. Slightly loosen the base T-clamp that secures the legs. 5. Grasp two legs, and twist them towards your sides. 6. Tighten the base T-clamp. 7. Grasp and lift the two legs. Roll JUGS as you would a wheelbarrow. -
Page 29: Maintenance
Maintenance Review the following instructions carefully to maintain maximum accuracy with your JUGS Pitching Machine. • Maintain tire pressure at 16 to 17 psi (25 psi for tennis balls). Cleaning • Keep machine clean, and free of grit and dirt. Always use a clean damp cloth when cleaning. -
Page 30: Product Specifications
Recommended Balls ..JUGS Balls, high quality leather baseballs or softballs IMPORTANT: Servicing requires extreme care and knowledge of the machine and should be performed only by JUGS. For service, we suggest you return the machine to JUGS for repair. Always use original factory replacement parts when servicing. -
Page 31: Operator Notes
Operator Notes... - Page 32 Operator Notes...
-
Page 33: Warranty Information
Warranty JUGS Sports guarantees that the JUGS Pitching Machines are well made; of good materials, and workmanship; and agrees that if, within five years after shipment thereof, any part so guaranteed should fail because of defective material or workmanship in its manufacture, the Company will repair or replace such part, free of charge F.O.B. - Page 34 In the USA and Canada, call toll-free: 1-800-547-6843 Internationally, call collect: 0-503-692-1635 Fax us: 503-691-1100 Visit our website: www.jugssports.com Model Serial No. Date Delivered SAVE THIS PORTION FOR YOUR RECORDS PLACE STAMP HERE JUGS Sports P.O. Box 365 Tualatin, Oregon 97062...
- Page 36 If you need more information about this product or any other JUGS product or service, please contact the manufacturer: In the USA and Canada, call toll-free: 1-800-547-6843. For International Orders, call collect: 0-503-692-1635. Our fax number is 1-503-691-1100. Visit our website at www.jugssports.com.
Need help?
Do you have a question about the Jr. and is the answer not in the manual?
Questions and answers