Lenovo RT1.5kVA Product Manual page 4

Figure 2. UPS Network Management Card
The NMC has the following features:
Versatile connectivity through HTTP, SNMP, SMTP, Telnet, SSL, and SSH
Simultaneous shutdown of protected servers
Configuration of automatic email messages in response to UPS alarms and to transmit reports
Customizable actions, including automatic shutdown if there is an extended power failure with
standard UPS Power Protector software
Control of UPS on/off switching with a web browser
Adjustment and control of load segments through the HTML interface, including sequential starting
of the installation and optimization of backup time by shutting down non-priority systems
Automatic date and time adjustment through an NTP server
Dual stack IP v4/IP v6
Recording of events and measurements in the card log
Data and event logging in the nonvolatile memory
Card firmware update through the network
10/100 Mb Ethernet (RJ-45 connector) with auto-negotiation
Measurement of humidity and temperature with the optional Environmental Monitoring Probe (EMP)
Easy installation (can be installed while the UPS is online, which maintains the highest availability)
An optional EMP (part number 46M4113) is used to report local temperature and humidity values and make
that information available to management tools. The EMP connects to the UPS via the NMC.
Figure 3. Environmental Monitoring Probe
The EMP has the following features:
Monitors temperature, humidity, and status of two user-provided contact devices/sensors
Connects to an NMC through an RJ-45 CAT5 Ethernet cable (1 m cable included with the EMP)
Can be located up to 20 m (65.6 ft) from the UPS
RT1.5kVA, RT2.2kVA and RT3kVA 2U Rack or Tower Uninterruptible Power Supplies 4