Download Print this page
Sealey CP36MS Instructions

Sealey CP36MS Instructions

Cordless lithium-ion screwdriver quick select 14pc 3.7v usb

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions and maintained properly, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Wear Eye
Refer to Instruction
Manual
Protection
1. SAFETY
1.1. GENERAL SAFETY
 Maintain the screwdriver in good condition. Check moving parts alignment on a regular basis.
 Keep the screwdriver clean for best and safest performance.
 Remove ill fitting clothing. Remove ties, watches, rings and other loose jewellery and contain long hair.
 Secure loose workpieces with a clamp, vice or other adequate holding device.
 Avoid unintentional starting.
 Wear approved safety eye protection.
 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
 Keep children and unauthorised persons away from the working area.
 DO NOT allow children to operate the screwdriver.
 DO NOT hold unsecured workpiece in your hand.
 DO NOT carry the screwdriver with your finger on the trigger.
 DO NOT use the screwdriver for a task it is not designed for.
 DO NOT operate the screwdriver when you are tired or under the influence of alcohol, drugs or intoxicating medication.
 DO NOT get the screwdriver wet or use in damp or wet locations.
 Keep screwdriver in a safe, dry, child proof area where the temperature will not exceed 104°F (40°C).
1.2.BATTERY SAFETY
 WARNING! To reduce the risk of burns or fire:
 DO NOT attempt to open, dismantle, modify or service the battery pack.
 DO NOT crush, puncture, short external contacts or dispose of in fire or water.
 DO NOT expose to temperatures above 60°C (140°).
2. INTRODUCTION
Compact, lightweight and comfortable to use. Quick bit selection combined with six bit magazine storage system means choosing the right bit
couldn't be easier. Forward, reverse and trigger-lock with soft grip handle. Features LED work light and three colour battery indicator. supplied
with 12 bits in USB charging cable.
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CP36MS
Battery: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3.7V 1.3Ah Li-ion
No Load Speed: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-230rpm
Maximum Torque: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5Nm
Charging Time: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5hr
Contents: . . . . . . . . . . . . . . . . . . . . . Screwdriver Bits; Slotted - 3, 4, 5mm, Philips - #1, #2, #3,
© Jack Sealey Limited
INSTRUCTIONS FOR:
CORDLESS LITHIUM-ION SCREWDRIVER
QUICK SELECT 14pc 3.7V USB
CP36MS
MODEL NO:
Pozi - #1, #2, #3, TRX-Star* - T10, T15, T20
fig.1
Original Language Version
CP36MS
Issue: 2(F) - 29/11/17

Advertisement

loading

Summary of Contents for Sealey CP36MS

  • Page 1 CP36MS MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions and maintained properly, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 4.4.1. The CP36MS is supplied with two magazines containing screwdriver bits. To change a bit which is contained in the fitted magazine, pull the magazine carrier forward (fig.2) and rotate the magazine until the required bit is at the top. The bit to be loaded may be viewed through the magazine viewer.
  • Page 3 WARNING! – Risk of Hand Arm Vibration Injury. This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately. This tool is subject to the vibration testing section of the Machinery Directive 2006/42/EC. This tool is to be operated in accordance with these instructions. Measured vibration emission value (a): .