User manual
12
Place the ironing on the insertion table and push it so that it is taken up by the cylinder.
Smooth out the linen starting at the centre and moving towards the edges.
When there are buttons, they should be placed against the cylinder to protect them and the tray.
For zippers and metal buttons, cover with a cloth to protect the bed.
5.7 Pressing function
For the pressing function, move the control pedal to position 2; the cylinder stops.
To continue ironing, release the pedal.
To insert thicker items, press the pedal down to position 3, the cylinder stops and the bed moves away.
Position the article to be ironed and again press on the pedal to continue ironing.
Note!
Push gently on the control pedal with your foot.
5.8 Stopping the machine
To get the maximum service life from the cylinder coverings, use the following procedure to stop ironing.
1. Position the thermostat to 0 to cut off the heating.
2. Let the cylinder turn in contact with the bed for a few minutes so as to eliminate the moisture from the coverings.