Restore To Default; Full Eco - Alecto DBX-85 eco User Manual

4.9 RESTORE TO DEFAULT:

As follow the settings of the babyphone can be restored to the default
values:
4 sec.
-
4 sec.
-

4.10 FULL ECO:

When FULL ECO is activated, there is no transmitting at all when the
baby is not crying.
2 sec.
+
2 sec.
+
Attention:
• A maximum sensitivity (level 5) will disable the Full ECO feature
if FULL ECO setting is set to ON. Reduce the sensitivity level to
resume the FULL ECO mode.
parent unit:
press and hold the - button for about 4 seconds
a double beep sounds and the unit is reset
Baby-unit:
press and hold the - button for about 4 seconds
a double beep sounds and the unit is reset
press and hold the + button for about 2 seconds,
the LED will light orange
press and hold the + button again to switch-off
this feature, the
11
LED will light green