Remote Web Management - Tenda F3 User Manual

Parameter
DHCP Server
Start IP/End IP
Preferred/Alternative
DNS Server
Setting DNS Server Addresses
This function enables you to set DNS server addresses for devices connected to the router. If you do not
configure DNS settings, the DHCP server of the router assigns the default DNS server address (LAN IP
address of the router) to the devices.

3.8.4 Remote Web Management

This function enables you to remotely log in to the web UI of the router over the internet.
To configure the function, choose Administration, and move to Remote Web Management. By default,
the function is disabled. Select the Enable to enable the function.
Description
 If the Enable is selected, the server assigns one IP address within a specified
IP address range to each device connected to the router.
 If the Enable is deselected, no IP address is assigned to the devices
connected to the router (such as laptops and mobile phones). These devices
can access the internet only after IP addresses are manually set on them.
Manual IP address setting is complicated and may easily cause IP conflicts.
Generally, it is recommended that you enable the DHCP server.
It specifies the range of IP addresses that can be assigned to devices connected
to the router.
It specifies the preferred and alternative DNS servers of devices connected to the
router.
50