Lenovo Xclarity Administrator; Power Supplies - Lenovo 8721 Product Manual

The CMM has a high-security policy that is enabled by default, which means that the following policies are
enabled by default:
Strong password policies with automatic validation and verification checks
Required update of the default passwords after the initial setup
Only secure communication protocols, such as SSH and SSL. Unencrypted protocols, such as
HTTP, Telnet, and SNMPv1, are disabled.
Certificates to establish secure, trusted connections for applications that run on the management
processors

Lenovo XClarity Administrator

Lenovo XClarity Administrator is centralized resource management solution aimed at reducing complexity,
speeding response and enhancing availability of both Lenovo server systems and solutions.
Lenovo XClarity Administrator provides agent-free hardware management for System x rack servers and
Flex System compute nodes and components, including the Chassis Management Module and Flex
System I/O modules. The following figure shows the Lenovo XClarity Administrator interface, where both
Flex System components and rack servers are being managed and can be seen on the dashboard.
Figure 8. Lenovo XClarity Administrator dashboard
For information about Lenovo XClarity Administrator, see the Lenovo Press Product Guide:
http://lenovopress.com/tips1200

Power supplies

A maximum of six hot-swap power supplies can be installed in the Enterprise Chassis. In models where
only two power supplies are standard, additional power supplies are orderable per the following table. All
installed power supplies must be the same.
Flex System Enterprise Chassis 14