Table of Contents
Advertisement
Description
Rack power cables
12ft Power Cable C13-C14
1.5m, 10A/100-250V, C13 to IEC 320-C14 Rack Power Cable
IEC309 C20 to C13 rack jumper cable
Country-specific power cords
European 10A line C13 to CEE 7/7 (2.8M)
Denmark 10A line C13 to DK2-5A (2.8M)
Switzerland 10A line C13 to SEV 1011 (2.8M)
Israel 10A line C13 to SI 32 (2.8M)
Italy 10A line C13 to CEE 7/7 (2.8M)
South Africa 10A line C13 to SABS 164/1 (2.8M)
United Kingdom 10A line C13 to BS 1363 (2.8M)
Australia/NZ 10A line C13 to SAA-AS C112 (2.8M)
Korea 7A line C13 to KETI 15A/250V (2.8M)
India 6A line C13 to Fig 68 (2.8M)
China 6A line C13 to GB 2099.1 (2.8M)
Brazil 10A line C13 to NBR 6147 (2.8M)
Argentina 10A line C13 to IRAM 2063 (2.8M)
Power Cable - C13 / NEMA 5-15P 14ft
Power Cord Taiwan AC plug 10A/250V, 2.8M; OPT
Power Cord Taiwan AC plug 15A/125V; 2.8M; OPT
10A/250V C13 to NEMA 6-15P 2.8m power cord
Japan 10A/100V C13 to JIS C-8303 2.8m power cord
Supported cables and transceivers
With the flexibility of the G7028 switch, clients can use the technologies that they require for the following
environments:
For 1 GbE links, clients can use RJ-45 UTP cables up to 100 meters. Clients that need longer distances
can use the SFP/SFP+ ports by using a 1000BASE-SX transceiver, which can drive distances up to 220
meters by using 62.5 µ multi-mode fiber and up to 550 meters with 50 µ multi-mode fiber or the
1000BASE-LX transceivers that support distances up to 10 kilometers by using single-mode fiber (1310
nm).
For 10 GbE (supported on SFP+ ports), clients can use direct-attached copper (DAC) SFP+ cables for in-
rack cabling for distances up to 7 meters. These DAC cables have SFP+ connectors on each end, and
they do not need separate transceivers. For longer distances, the 10GBASE-SR transceiver can support
distances up to 300 meters over OM3 multimode fiber or up to 400 meters over OM4 multimode fiber with
LC connectors. The 10GBASE-LR transceivers can support distances up to 10 kilometers on single mode
fiber with LC connectors.
The supported SFP/SFP+ and DAC cable options are listed in Table 3.
Table 3. Supported SFP/SFP+ transceivers and DAC cables
RackSwitch G7028
Part number
Feature code for
MTM 7309-HCP
39Y7932
6263
39Y7937
6201
39Y7938
6204
39Y7917
6212
39Y7918
6213
39Y7919
6216
39Y7920
6218
39Y7921
6217
39Y7922
6214
39Y7923
6215
39Y7924
6211
39Y7925
6219
39Y7927
6269
39Y7928
6210
39Y7929
6223
39Y7930
6222
39Y7931
6207
00CG265
A53E
00CG267
A53F
46M2592
A1RF
46M2593
A1RE
4
Advertisement
Table of Contents
