Factory Calibration And Service; In-House Factory Calibration; Return Materials Authorization (Rma) Form; Obtaining Repair Service - In-situ Level TROLL 500 Operator's Manual

Factory Calibration and Service

In-House Factory Calibration

Factory calibration of In-Situ instruments should be performed every 12 to 18 months, or at any point when the data appears
to drift significantly. Factory calibration includes a thorough cleaning, all operational checks, necessary firmware upgrades,
O-ring replacement, and full range calibrations of the pressure sensor, temperature sensor, and conductivity sensor (when
applicable).

Return Materials Authorization (RMA) Form

To obtain a factory calibration, fill out and return the online Return Materials Authorization (RMA) form located at www.in-
situ.com/.

Obtaining Repair Service

If you suspect your system is malfunctioning and repair is needed, you can help assure efficient servicing by following these
guidelines:
1. Call or email In-Situ Technical Support. Have the product model and serial number available.
2. Be prepared to describe the problem, including how the product was used and the conditions noted at the time of
the malfunction.
3. If Technical Support determines that service is needed, they will ask your company to fill out the RMA form and
pre-approve a specified monetary amount for repair charges. When the form and pre-approval is received,
Technical Support will assign an RMA (Return Material Authorization) number.
4. Clean the product as described in the manual.
5. If the product contains a removable battery, remove and retain it unless you are returning the system for a refund or
Technical Support states otherwise.
6. Carefully pack your product in its original shipping box, if possible.
7. Mark the RMA number clearly on the outside of the box.
8. Send the package, shipping prepaid, to:
In-Situ
ATTN: Repairs
221 East Lincoln Avenue
Fort Collins, CO 80524
The warranty does not cover damage during transit. In-Situ recommends insurance for all shipments. Warranty repairs will be
shipped back prepaid.
Outside the U.S.
Contact your international In-Situ distributor for repair and service information.
1-800-446-7488 76 www.in-situ.com