Page 1
LT-32DZ1 LT-42DG1 LT-47DG1 INSTRUCTIONS WIDE LCD PANEL TV MENU GUIDE TOP MENU BACK RADIO ..ZOOM GUIDE RM-C1930 Digital Video Broadcasting Trade Mark of the DVB Digital Video Broad casting 0609TMH-TE-TE...
Preface About this manual Thank you for purchasing our LCD Color Television(LCD stands for Liquid Crystal Display)! We are pleased to present a product that has been designed with excellent quality, reliability and performance to make your viewing experience more satisfying than ever before. This manual provides detailed descriptions on how to use this product and making adjustments according to your personal preferences.
Important safety information WARNING CAUTION This symbol is intended to tell the user that parts inside the product pose a RISK OF ELECTRIC risk of electric shock to persons. SHOCK; DO NOT OPEN CAUTION: CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT This symbol is intended to tell the user REMOVE COVER.
Page 4
• The openings should never be covered with a cloth or other material, and the bottom openings should not be blocked. • This LCD television should be operated only from a power source indicated on the marking label. • As a safety feature, this LCD television is equipped with an earthed power plug, if the plug does not fit in your power outlet, contact your electrician.
Page 5
• The main power supply for this TV is controlled by inserting or removing the power plug. • Place the TV as close to the outlet as possible. • Never place anything on the TV! Placing liquids, naked flames, cloths, paper, etc. on the TV may cause a fire. •...
Table of Contents Overview of the LCD TV ........... Features................1 List of parts..............Product components............2 Front View...............2 Rear View............... Remote control............... Getting started ..............Installing the stand............Inserting the remote control batteries........Connecting power............6 Basic operations............Cable connections............Guide................HDMI CEC..............15 Using the OSD menus ............
Overview of the LCD TV Congratulations on purchasing the LCD Color Television. This product has been designed to provide you with a variety of audio and video experiences, along with an easy and convenient connection. This LCD television allows you to watch broadcast or cable television, channels, connect a VCR, VCD or DVD player to watch your favorite movies or connect to a computer.
Product components Front view Power Indicator Remote Control Sensor ▲/▼ Increase or decrease channel numbers. VOL/ Increase or decrease the volume. MENU Press the button to enter On Screen Display (OSD). SOURCE Switch among the input sources. POWER Turn the TV ON or OFF.
Rear view HDMI IN 1/2(HDMI connecter) Connect to the HDMI output of your PC or portable computer or A/V device. PC AUDIO IN Connect to the audio output of your PC or portable computer. PC IN Connect to the VGA output of your PC or portable computer. AV IN 1/2/3 Connect to the audio and video output of A/V or component device.
Remote control BUTTONS FUNCTIONS TV power on/off (POWER) 2. Number buttons Select a TV channel 3. AV Switch to the EXT position 4. Colour buttons Red(or Sub-page down), Green(or Sub-page up), Yellow, Blue TV menu on/off 5. Menu 6. P Choose a TV channel upper or lower + -(Volume) Adjust the TV volume upper or lower...
• space is available around the TV to allow satisfactory cooling. Installing the stand(Only for LT-32DZ1, LT-42DG1) 1.To avoid damaging the LCD TV, two or more people should carry the TV. 2.Carefully place the LCD TV faced down on a soft cloth or cashion on a table or flat surface.
Inserting the remote control batteries Insert the two AAA batteries provided into the remote control as described below: 1. Pull the latch on the battery compartment cover on the rear of the remote control and remove the cover. 2. Insert the two supplied AAA un-rechargeable batteries. Check the + and - ends of the batteries before inserting them in the compartment.
Basic operations Watch images from external equipment Turn the TV on or off Use the AV button: 1.Make sure to set the input source in the Press the AV button to choose an EXT TV position. You cannot turn the TV on or off when the terminal.
Full Native ZOOM function Full Native is 16:9 aspect & without You can change the screen size according overscan. to the picture aspect ratio. Choose the Note: When user select “Full Native” in optimum one from the following ZOOM 1080i@HDMI mode and HDMI source modes.
Teletext function Basic operations 1. Choose a TV channel with a teletext broadcast. 2. Make sure to set the Mode button switch to the TV position. 3. Press (Text) button to display the teletext. 4. Choose a teletext page by pressing the buttons, number buttons or colour buttons.
Cable Connections RF IN It is strongly recommended that you connect the antenna using a 75Ω coaxial cable to get optimum picture and sound quality. A 300Ω twin lead cable can be easily affected by radio and other background noise, resulting in signal deterioration. When using a 300Ω twin lead cable, please keep this cable as far away from the TV as possible.
Page 17
S-VIDEO/AUDIO IN Connect to device with S-Video output,such as DVD player,digital camera or satellite receiver etc. S-VIDEO white white AUDIO L AUDIO R AV OUT Connect to device with video/audio input such as LCD, DVD recorder, VCR, Home theater audio equipment etc. (Y)Yellow (Y)Yellow VIDEO...
Page 18
HDMI IN Connect to device with HDMI output, such as DVD player,VCR / VCD player etc. HDMI Please use a High speed HDMI Cable, High speed HDMI Cable are tested to carry an HD signal up to1080p and higher. Format Resolution Type Vertical frequency Remark 640 x 480...
Page 19
PC AUDIO IN/PC IN Item H.Freq. (KHz) Mode Resolution V.Freq. (Hz) Remark 31.469 IBM VGA 12H 640x480 640x480 640x480 720x400 37.879 VESA 800x600 60.317 800x600 800x600 832x624 48.363 VESA 1024x768 60.004 47.7 VESA 1360x768 60 H total =1792 Notes: Refer to these notes before connecting any audio / video equipment to this TV: •...
Guide(EPG) (only available in DTV mode) Press Guide button to display the Electronic Programme Guide. You can check the program information for the next 7 days (If the information is available from the broadcaster.) “ ” Press button to select the channel. “...
HDMI CEC What is “HDMI CEC” ? HDMI CEC (Consumer Electronics Control) allows the TV to control multiple HDMI CEC enabled devices with a single remote. CEC(Consumer Electronics Control) is an optional protocol used in HDMI. NOTE: • HDMI CEC on this TV is compliant with “High-Definition Multimedia Interface Specification”.
Page 22
Operations Press “MENU” button to enter OSD menu. Press “ ” to select the OPTION menu. Press “ ” to select the item you want to adjust. Press “ ” to change the status. Press “MENU” button to exit. (Control with HDMI) adjustment Press “...
Using the OSD MENU The On-Screen Display (OSD) menu system provides a quick and simple method to adjust LCD TV setting. OSD menu can be viewed using both the remote control and the control buttons on the control panel. If you want to adjust the display settings, please follow the instructions below: (In TV mode) Press the “MENU”...
Press “MENU” button to enter OSD menu. Channel Adjustment • The channel adjustment enables you to select Auto Tuning, DTV Manual Tuning, ATV Manual Tuning, Programme Edit. Only in TV mode you can change Note: Before you press the MENU button, please select the input source first.
Page 25
The TV will search channels automatically. DTV Manual Tuning (only available All channels will be saved once search in DTV mode) finished. In the course of Auto Tuning, you can press “BACK” to stop searching process. Note: If it is the first time installation, it will start with Installation Guide Menu as below.
Page 26
Programme Edit ATV Manual Tuning(only available in TV mode) Press “ ” button to select items. If you find one channel is a little weak, you can Press the red button to delete the channel. adjust the frequency of the channel. It might be Press the green button to rename the improve the quality of picture and sound.
Press “MENU” button to enter OSD menu. Sound Adjustment • The sound adjustment enables you to adjust Sound Mode,Treble, Bass, Balance, Auto Volume and Surround Sound . Press “ ” to select SOUND mode Press “ ” to select (Sound Mode) item.
Page 30
Press “ ” to select the sound mode: Standard, Repeat step 1 and 2 “ ” Press button to select items and Music, Movie, Sports and User. “ ” press button to adjust it. (Treble) adjustment Press “ ” button to adjust the level of the higher-pitched sounds from 0 to 100.
Press “MENU” button to enter OSD menu. Time Adjustment • The time adjustment enables you to change Clock, Sleep Timer and Time Zone. Press “ ” to select TIME mode select (Sleep Timer) item . Press “ ” to...
Page 32
Repeat step 1 and 2 Press “ ” to set the Sleep Timer as: 10min “ ” Press button to select items and ,20min,30min,60min,90min,120min,180min, “ ” press button to adjust it. 240min,off. Clock) adjustment Display the system time get from DTV signal or set the system time by date、month、year、hour、minute.
Option Adjustment Press “MENU” button to enter OSD menu. • The function adjustment enables you to change Language, Country, Daylight Saving, Control with HDMI, Power off Link and Restore Factory Default. Press “ ” to select the OPTION menu. Press “ ”...
Page 34
” to turn on / off the function of Press “ Repeat step 1 and 2 “ ” Press button to select items and Daylight Saving. If it is set as “ON”,the time of system clock will add one hour. “...
Lock Adjustment Press “MENU” button to enter OSD menu. • The function adjustment enables you to change Lock System, Set Password, Block Program and Parental Guidence. Press “ ”to select the LOCK menu. Enter the password.(Default password is 0000). Press “ ”...
Page 36
Repeat step 1 and 2 Set Password “ ” Press button to select items and Press“ ” or ”OK” button to enter the submenu. “ ” press button to adjust it. (Lock System)adjustment Press “ ” button to set lock system on/off.
Troubleshooting No power • Make sure the TV and the power cord are connected correctly. • Check if you pressed POWER on the remote control unit. If the indicator in the front panel is red, press POWER in the remote control or the front control panel.
Wall Mount items. Contact a technician for assistance when installing the wall mounted bracket. JVC is not responsible for any damage to the product, property or injury to yourself or others if you elect to install the TV.