Weller W60P Technical Sheet

WellerTech Sheet
W60P(D)-W100P(D) Series

PRODUCT DESCRIPTION

A line voltage high quality portable tool with all the
advantages of controlled output and temperature. The
special Weller "closed loop" method of controlling maxi­
mum tip temperature is employed, thereby protecting
temperature sensitive components.
The soldering pencil also features a stainless steel
modular plug in heater construction for greater soldering
efficiency, cool blue handle, a large selection of iron
plated tips and sizes, for W60P from 1 / 16" to 1 / 4" and
for W100P from 1 /8" to 3/8" and both irons with choice
of tip temperature of 600, 700, _and 800
irons are provided with a CT5A7 tip (700
ter, screwdriver). The W100P irons are provided with a
CT6F7 tip (700" 1 /4" diameter screwdriver).
Both the W60P and W1 OOPJrnns are equipped with the cool blue handle. The W60P 2 wire and W1 OOP 2 wire are
U.L. approved. The 60P-3 and W100P-3 are U.L. and C.S.A. approved. The W60PD3 and W100PD3 are 240V 3 wire
irons. The modular heating elements are interchangeable and either handle can be used with either heating element.
Line voltage - 120 Volts, 50/60 Hz (W60PD3 and W1 OOPD3 240 Volts, 50/60 Hz)
Electrical: 1.
Soldering pencil wattage - W60P, 60 Watts
2.
3. Tip leakage voltage to ground - 2 wire ± 5 Volts RMS
1. Perici I weight - W60P without cord 2 oz.
Physical:
2. Pencil length - W60P less tip 7-1 /2"
Cord length - Six (6) foot all models.
3.
Nominal heat up time - W60P with CT5E7 tip = 11 O seconds
4.
Nominal recovery time from 100
5.
*Tip ground connected.
°
F. The W60P
°
1/16" diame­

SPECIFICATIONS

W100P, 100 Watts
3 wire± 10 Millivolts RMS*
W1 OOP without cord 3 oz.
W100P less tip 7-3/4"
W1 OOP with CT6F7 tip = 11 O seconds
°
F drop - W60P with CT5E7 tip
W60P
W100P
=' - 16
W100P with CT6F7 tip-= 40 seconds
Visit us at www.TestEquipmentDepot.com
Form No. WSOO
seconds.
99 Washington Street
Melrose, MA 02176
Phone 781-665-1400
Toll Free 1-800-517-8431