Sharp SB-29S Service Manual page 12

1. Remove the panel B-A and faucet ass'y in accordance with "REMOVE OF PANEL B-A AND FAUCET
ASS'Y".
2. Remove the thermostat in accordance with "REMOVE OF THERMOSTAT".
3. Remove the heater set ass'y.
4. Cut 3 cord bands and remove the clamp for silicone tube.
5. Detach all tube from heater tank ass'y.
6. Remove 3 screws holding the heater tank ass'y.
7. Now the heater tank ass'y is free.
1. Remove the panel B-A and faucet ass'y in accordance with "REMOVE OF PANEL B-A AND FAUCET
ASS'Y".
2 Remove 2 screws holding the heater set support.
3. Unfasten 2 screws at the heater ass'y and then pull the heater set ass'y out of the heater tank ass'y.
Fig. 13
4. Now the heater set ass'y is free.
REMOVE OF HEATER TANK ASS'Y
Cord band
Clamp for silicone tube
Screw
Heater holder-B
Cord band
Drain tube
REMOVE OF HEATER SET ASS'Y
Hot water inlet tube
Cord band
Heater tank
Screw
Heater tank support
Heater set
Screw
Heater holder-A
Fig. 13
12
Tank support