Topaz/Sapphire/V950; Commander Site Controller; Connecting To Broadband Internet - VeriFone Cybera SCA-315 Installation Manual

Topaz/Sapphire/V950

Individually connect each device with a standard Ethernet cable to one of the LAN ports on
the Enhanced Zone Router indicated with a green light.
Note:
The Ruby does not physically connect to the Enhanced Zone Router.
Devices:
Topaz
■
Sapphire
■
V950
■

Commander Site Controller

Individually connect each device with a standard Ethernet cable to one of the LAN ports on
the Zone Router indicated with a green light.
Note:
Topaz and/or PINpads may be connected to a switch due to port density.
Devices:
Commander Site Controller
■
Topaz
■
POS Switch
■
PINpads
■

Connecting to Broadband Internet

Note:
If the Enhanced Zone Router will be "Online" (broadband connection), continue
with these instructions. If the Enhanced Zone Router will be "Offline", go to
Access Configuration Portal.
Connect the Enhanced Zone Router directly to the Internet provider's
■
modem/firewall or the site router/switch/firewall providing Internet connectivity
where present. If a Cybera SCA-315 is present, WAN 1 of the Enhanced Zone Router
device should be plugged into LAN port 2 of the SCA-315. See example connections
in Appendix A and B.
January 23, 2015
Verifone Enhanced POS Zone Router Installation Guide
3