Advertisement
Quick Links
Advertisement
Related Manuals for Snow Peak SET-200 Rack Sotto Multi-Starter Set
Summary of Contents for Snow Peak SET-200 Rack Sotto Multi-Starter Set
- Page 1 Instructions Manual Ver 1.00 SET-200 Rack Sotto Multi-Starter Set LV-210 Rack Sotto Base Unit...
- Page 2 Thank you for purchasing this Snow Peak product. This product is a sofa, cot, chair, and storage shelf designed for outdoor use. In order to ensure your safety when using this product, please read these instructions carefully before use. Please be sure to keep this document for future reference.
- Page 3 Safety Precautions: Please read thoroughly before use in order to use safely and avoid expected accidents. DANGER: Indicates actions from which life-threatening, major accidents are clearly expected. ■ When transporting the main unit by vehicle as a storage shelf - Put the unit into the storage shelf / transportation state as instructed in the “Method of Use” section. - Ensure that it does not obstruct the rear window or side windows.
- Page 4 Base Unit: Assembly Base unit: Attaching the Velcro tape There are two strips of Velcro tape for each base unit. Attach them as shown in the diagram below. Velcro loops Velcro hooks Base unit: Assembly After removing the safety belts, push down on the legs from the top of the base unit to release them from the leg clasps. Slowly lift the main unit, which will cause the legs to extend.
- Page 5 Multi-Starter Set: Method of Use Backrest: Pipe assembly Insert the two backrest pipes into the backrest. Secure the assembly by hooking the elastic cords on the backrest around the fastening buttons on the pipes. Fastening button Base unit: Connection To connect multiple base units together, slide the handles as shown in the diagram below, and secure them in the “LOCK” position. Ensure that the numbers on the surfaces of the base units all read “105°”...
- Page 6 Sofa After connecting three base units together, fold over the backrests as shown in the diagram below, and insert them into the base units. Place the cushions on top. <Schematic> Fold over Note! If you insert the backrests with the numbers on the surfaces of the base units reading “105°”, the backrests will be at an angle of...
- Page 7 After connecting three base units together, fold over two backrests as shown in the diagram below, and insert them into the base units. Place the cushions on top. <Schematic> Fold over Note! You can also configure the cot with one backrest raised up, as shown in the diagram Logos face below.
- Page 8 Chair After assembling one base unit, fold over one backrest as shown in the diagram below, and insert it into the base unit. Place one cushion on the seat surface, and attach the other as a backrest as shown in the diagram below. <Schematic>...
- Page 9 Table The base unit can be used as a table by combining it with two Wood Table W Bamboo units (CK-126T, sold separately). CAUTION Perform these tasks while pressing on the handle with one hand as shown in the diagram. Pull out the Otherwise, the handle elastic cords...
- Page 10 Multi-Function Table Bamboo Series: Connection Base units can be connected to a Multi-Function Table Bamboo (CK-116T, sold separately), Multi-Function Table Long Bamboo (CK-117T, sold separately), Multi-Function Table Corner L Bamboo (CK-118T, sold separately), and Multi-Function Table Corner R Bamboo CK-119T, sold separately). *Please use either the Iron Grill Table 300 Leg Set (CK-109, sold separately) or the IGT2WAY Leg Short Set (CK-109, sold separately) set to 300mm for the legs on the Multi-Function Table Series.
- Page 11 Storage shelf Backrest pipe *Attach two backrest pipes at opposite corners on each level. Rest on the fastening button WARNING: Indicates conditions which may lead to death or injury of the user if the product is mishandled. ● Do not stack more than 3 units, and do not exceed a maximum load of 20kg per base unit. ●...
- Page 12 Snow Peak Inc. please consult the store where you purchased this product or contact our 456 Nakanohara, Sanjo-shi, User Service department. Niigata-ken 955-0147 TEL: 0256-46-5858 Snow Peak User Service FAX: 0256-46-5860 www.snowpeak.co.jp 0120-010-660 (9:00am – 5:00pm) Email: userservice@snowpeak.co.jp MADE IN CHINA...
Need help?
Do you have a question about the SET-200 Rack Sotto Multi-Starter Set and is the answer not in the manual?
Questions and answers