Related Manuals for Parker Karrykrimp 2
Summary of Contents for Parker Karrykrimp 2
- Page 1 Bulletin 4480-T7-US Technical Manual Crimping Machine Effective: August 2006 Supersedes: July 2005 Karrykrimp 2...
-
Page 2: Safety Notice
• Injections by high-pressure fl uid discharge. Before selecting or using any of these Products, it is important that you read and follow the instructions below. Only Hose from Parker’s Stratofl ex Products Division is ap- proved for in fl ight aerospace applications, and no other Hose can be used for such in fl ight applications. -
Page 3: Table Of Contents
Offer of Sale ............................19 Help us help you... Read this guide carefully. It is designed to help you operate and maintain your Karrykrimp 2. If you do not understand something or need more help, call: Technical Services Department Write down the Model and Serial Number: Parker Hannifi... -
Page 4: Specifi Cations
1” SAE 100R13 maximum 1” SAE 100R16 maximum 1-1/4” SAE 100R17 maximum Note: For the latest crimper compatibility; reference CrimpSource online at www.parkerhose.com or contact your Parker products supplier. Set-up Time: 20 Seconds Full Cycle Time: 30 Seconds Model 85C-061 Includes: Note: Cycle times vary depending on hose and fi... -
Page 5: Accessories
Port Size 3/8” NPTF All pumps shown above are supplied to Parker by Enerpac. For repair or warranty work on an of these pumps, contact your nearest Enerpac Service Center. For the Enerpac Service Center nearest you, call 1-800-558-0530 or visit them on the web at www.enerpac.com. -
Page 6: Accessories
Karrykrimp 2 Accessories ENERPAC Warranty Policy For those ENERPAC items sold as part of the Parker product offering, the following warranty applies. warranty will be returned by ground transportation, freight ENERPAC products are warranted to be free of defects in prepaid. -
Page 7: Installation
Make sure cylinder is fully retracted before adding any hydraulic oil. 5. Your machine is now ready for use. Please read the remainder of this manual before proceeding to crimp any hose assembly. Figure 2 Parker Hannifi n Corporation Hose Products Division Wickliffe, OH... -
Page 8: Tools And Dies
Bulletin 4480-T7-US Karrykrimp 2 Tools and Dies The following crimping dies are available for use with the Karrykrimp 2 machine: 26 Series Fitting Dies (Silver) 43 Series Fitting Dies (Silver) 80C-A04 Size -4 (1/4”) Color Coded Red 80C-E04 Size -4 (3/16”) -
Page 9: Tool Selection Chart
If you fi nd your crimp diameters out of tolerance, inspect each assembly made. Never allow hose assemblies with an incorrect crimp diameter to be used. Use the appropriate Parker Machine Trouble Shooting Guide to determine the cause. If you are unable to determine the cause of the problem, call our Hose Products Division Technical Services Department at (440) 943-5700, for assistance. -
Page 10: Crimping Instructions
1” 1-3/4” 1-13/16” 1-3/4” 2” 1-1/4” supplied by Parker Hannifi n for the expressed 1-7/8” 1-13/16” 1-5/16 purpose of operating the designated crimper. Parker Hannifi n Corporation Hose Products Division Wickliffe, OH... -
Page 11: Assembly Details And Parts Lists
85C-R01 Silver Die Ring TH18-B-2 3/8-16 X 7/8” SHCS 85C-R02 Black Die Ring 85C-00P Pusher * These components are not sold as individual items, contact Technical Services Department at (440) 943-5700. Parker Hannifi n Corporation Hose Products Division Wickliffe, OH... -
Page 12: Trouble Shooting
Karrykrimp 2 Trouble Shooting Guide If you have a problem with your Karrykrimp 2 machine... First, check that the proper tooling, hose and fi tting combinations are being used. Then check the following recommendations. If after the following suggested remedy, the problem persists, call our Technical Service Department (440) 943-5700. - Page 13 Contact Technical Services Department at (440) 943-5700 for repair. Lubricate the die cavity in base plate frequently to prevent wear. Parker Hannifi n Corporation Hose Products Division Wickliffe, OH...
-
Page 14: Maintenance
• Apply approved grease to the dies and crimp bowl each time the dies are changed. If dies are not changed through a day’s operation, grease should be applied twice a day. Parker Hannifi n Corporation Hose Products Division Wickliffe, OH... -
Page 15: Safety Guide (Parker Publication 4400-B.1)
•Injuries resulting from inhalation, ingestion or exposure to fl uids. Before selecting or using any of these Products, it is important that you read and follow the instructions below. Only Hose from Parker’s Stratofl ex Products Division is approved for in fl ight aerospace applications, and no other Hose can be used for such in fl... - Page 16 Hose and Fitting Assembly: Do not assemble a Parker Fitting on a excessive fl uid velocity. Parker Hose that is not specifi cally listed by Parker for that Fitting, unless authorized Routing: Attention must be given to optimum routing to minimize in writing by the engineering manager or chief engineer of the appropriate Parker inherent problems (kinking or fl...
- Page 17 Reusable/Permanent: Do not reuse any fi eld attachable (reusable) hazardous areas while testing and using the system. See section 2.2. Hose Fitting that has blown or pulled off a Hose. Do not reuse a Parker permanent Replacement Intervals: Hose assemblies and elastomeric seals used Hose Fitting (crimped or swaged) or any part thereof.
- Page 18 Bulletin 4480-T7-US Karrykrimp 2 Notes Parker Hannifi n Corporation Hose Products Division Wickliffe, OH...
-
Page 19: Offer Of Sale
The items described in this document and other documents or descriptions provided by Parker Hannifi n Corporation, as subsidiaries and its authorized distributors are hereby offered for sale at prices to be established by Parker Hannifi n Corporation, its subsidiaries and its authorized distributors. -
Page 20: Hose Products Division
Parker Hannifi n Corporation Hose Products Division 30240 Lakeland Boulevard Wickliffe, OH 44092 Phone: (440) 943-5700 Fax: (440) 943-3129 Bulletin 4480-T7-US 7/05 - 1M www.parkerhose.com ©Parker Hannifi n Corporation Printed in U.S.A...
Need help?
Do you have a question about the Karrykrimp 2 and is the answer not in the manual?
Questions and answers