Display Flow-Template Interface - HP A8800 Series Command Reference Manual

Description
Use display acl resource to display the usage of ACL rules.
If a card does not support counting ACL rules, the command displays only the slot number of the card.
Examples
# Display the usage of ACL resources on all cards.
<Sysname> display acl resource
Slot: 2
Resource
Type
------------------------------------------------------------------------------
IPV4-ACL
IPV6-ACL
Table 4 Command output
Field
Slot
Resource Type
Total Number
Reserved Number
Configured Number
Remaining Number
Start Interface
End Interface

display flow-template interface

Syntax
display flow-template interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number. If no interface is specified,
information about all user-defined flow templates applied to interfaces is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
Total Reserved Configured
Number Number Number
16384 0 0
1024 0 0
Description
Slot number of a card.
Resource type.
Total number of ACL rules supported.
Number of reserved ACL rules.
Number of ACL rules that have been applied.
Number of ACL rules that you can apply.
Name of the start interface on the card.
Name of the end interface on the card.
Remaining Start
Number Interface
16384 GE2/1/1
1024 GE2/1/1
13
End
Interface
GE2/1/8
GE2/1/8