Sanyo DVD-7000 Supplemental Service Manual page 16

SCHEMATIC DIAGRAM (MAIN for XE)
This is a basic schematic diagram.
- 18 -
PRODUCT SAFETY NOTICE
Each precaution in this manual should be followed during servicing. Components identified with the IEC symbol
components in which safety can be of special significance. When replacing a component identified by
same ratings of resistance, wattage or voltage that are designated in the parts list in this manual. Leakage-current or resistance measurements must be made to
determine that exposed parts are acceptably insulated from the supply circuit before returning the product to the customer.
in the parts list and the schematic diagram designated
! ! !
! ! ! , use only the replacement parts designated, or parts with the
- 19 -