Advertisement
Turboflotor Blue 1000
Operation Manual GB
Motor driven skimmer for saltwater aquaria up to a volume of 500 liters.
In purchasing this unit you have selected a top quality product. It has been specifically designed
for aquarium use and has been tested by experts. This unit will efficiently remove the dissolved
organic substances in your aquarium water.
GmbH
Gewerbepark 24 D- 49143 Bissendorf, Germany
_________________________________________________________________________________________
1
Advertisement
Table of Contents
Related Manuals for Aqua Medic Turboflotor Blue 1000
Summary of Contents for Aqua Medic Turboflotor Blue 1000
- Page 1 Turboflotor Blue 1000 Operation Manual GB Motor driven skimmer for saltwater aquaria up to a volume of 500 liters. In purchasing this unit you have selected a top quality product. It has been specifically designed for aquarium use and has been tested by experts. This unit will efficiently remove the dissolved organic substances in your aquarium water.
- Page 2 The Turboflotor Blue 1000 consists of the following parts: - Foam cup, cover and reaction-pipe, - a venturi pump Ocean Runner OR 3500 inclusive AB Aqua Medic needle wheel. 2. Parts of the Turboflotor Blue 1000 1. Lid for foam cup 2.
- Page 3 The AQ 1200 venturi pump draws the water out of the aquarium or the filter chamber, mixes it in the pump housing with air, which is then cut into small air bubbles by the AB Aqua Medic needle wheel. This water/air mixture is pumped into the reaction pipe where the organic substances are taken up by the air bubbles.
- Page 4 - next to the filter tank - in the filter tank Fig.3: Turboflotor Blue 1000 in “Hang on” operation Set up as an external skimmer on the aquarium - Hang on (fig. 3): Assemble the necessary parts of the skimmer, (see fig. 1). It now be can be attached to the aquarium.
- Page 5 Set up: beside or inside the filter tank of a sump or under tank filter system (fig. 4): The Turboflotor Blue 1000 can also be used in a sump or under tank filter system. It can be placed either in- or outside the filter.
- Page 6 5. Starting/Performance The system can be started when the Turboflotor is correctly installed. After switching the pump on, air is automatically drawn into the skimmer. To minimize the noise level, connect the air inlet tube with the blue connecting piece of the silencer supplied. Fix the silencer with the holding device on the aquarium or the filter system.
- Page 7 These statements do not affect your statutory rights as a customer. If your AB Aqua Medic GmbH product does not appear to be working correctly or appears to be defective please contact your dealer in the first instance.
Need help?
Do you have a question about the Turboflotor Blue 1000 and is the answer not in the manual?
Questions and answers