Fujitsu ETERNUS AF250 S2 Configuration Manual page 17

FUJITSU Storage ETERNUS AF series and ETERNUS DX S4/S3 series
When clustering the management servers using WSFC, perform the following steps in the workflow after Storage Cluster is configured in one
of the management servers.
Operations for the ETERNUS DX200
Item
S4/ETERNUS SF and Fibre Channel switches
Preparation of the
WSFC
environment
Configuration of
the WSFC
environment
Customization of
management
server operations
Copyright 2016-2017 FUJITSU LIMITED
Operations for clustering
Operations performed in management server #1
Change the management server #1
environment
Create shared drives
Create clusters
Prepare general-purpose scripts
Create cluster resources
Set up shared drive files
Set up the configuration file and registry
Set up the access permissions for the shared
drives
Execute the cluster setup command
Execute the cluster setup command
Register the service resources
Start ETERNUS SF Manager
Set up the AdvancedCopy Manager CCM
environment
Customize the Storage Cluster controllers
Page 17 of 18
management servers
Operations performed in management server #2
Create management server #2 (to the OS
environment)
Configure the management server #2
environment
Stop the service
Install WSFC
Prepare general-purpose scripts
Set up shared drive files
Set up the configuration file and registry
Set up the access permissions for the shared
drives
Execute the cluster setup command
Execute the cluster setup command
B
A
http://www.fujitsu.com/eternus/