Related Manuals for ZappBug Room
Summary of Contents for ZappBug Room
- Page 1 The ZappBug Room Owner’s Manual IMPORTANT NOTICE: Read Warnings Before Use! SAFE PROVEN EXTERMINATION...
- Page 2 This page is intentionally left blank ©2014-2016 ZappBug. All rights reserved. Product specifications subject to change.
-
Page 3: Table Of Contents
Heat Treatment Hints and Tips Use & Operation 8 ZappBug Room Set Up Treating Items Turning on the ZappBug Room 13 Treatment Time Bug Mortality Time and Temperatures Troubleshooting Tips Warranty Information To learn more, please visit us at ZappBug.com... -
Page 4: Safety Information
Please read all Warnings outlined in this section. Failure to comply could result in fire, injury, or damage to property! Warnings describe serious consequences resulting from misuse of this product. ©2014-2016 ZappBug. All rights reserved. Product specifications subject to change. - Page 5 It is important to make sure that any outlets used with this product have strong electrical contact. To learn more, please visit us at ZappBug.com...
- Page 6 Warning: Old Electrical Wiring and Outlets Each ZappBug thermal unit will draw 12-15 amps of current (1500 Watts) and must be run on circuits rated 15 amps and above only. Some old electrical wiring and outlets may not be capable of sustaining these loads. If you are unsure of the electrical wiring or outlets in your location, contact an electrician before operating ZappBug or any other high-current products.
-
Page 7: Heat Treatment Hints And Tips
Only use indoors with an ambient room temperature above 70 F. The • heater works by adding heat to the air from the room in which it is located. If the ambient temperature is below 70 F, the ZappBug Room may not reach bed bug killing temperatures. -
Page 8: Use & Operation
Video can be found in the Product 1. Unroll The Room Description 2. Unfold The Room with Quilted Side Down 3. Unzip All 5 Zipper Pulls ©2014-2016 ZappBug. All rights reserved. Product specifications subject to change. - Page 9 Use & Operation (continued) 4. Unfold All Sides & Expose Base Note: Extend legs until locking brackets click into position. 5. Extend Room Frame Legs To learn more, please visit us at ZappBug.com...
- Page 10 Use & Operation (continued) 6. Expand Room Frame Note: Expand frame until locking pins click into fixed position on all four legs. 7. Assemble Room on Room Frame ©2014-2016 ZappBug. All rights reserved. Product specifications subject to change.
-
Page 11: Treating Items
The recircu- lation fan may be plugged into the same electrical circuit or outlet as one of the four heaters. Fan inlet should face into the Room and Outlet should be directed at the floor. - Page 12 The ZappBug Room is a highly versatile heat treatment chamber. Place the items you are heat treating into the room. Use the included foam blocks to raise furniture above the floor of the Room for circulation. Fluff all items where possible and avoid stacking items in piles.
-
Page 13: Treatment Time
NOTE: Each heater must be powered from it’s own circuit. Typical residential and commercial buildings have one circuit per room. Use the included extension cords to reach outlets in other rooms (where necessary). Three power cords are included in each ZappBug Room, one with two female ends. - Page 14 F in all three locations. If you are not present while the unit is running we advise setting the timers to 8 hours, however this is generally more time than required for the ZappBug Room to reach 120F and maintain it for one hour. Follow instructions included with...
-
Page 15: Bug Mortality Time And Temperatures
Dust Mites 140°F 8 mins Moths 120°F 30 mins Fleas 140°F 10 mins Carpet Beetles 120°F 30 mins Always add one hour more than necessary to treatment time to ensure bug mortality. To learn more, please visit us at ZappBug.com... - Page 16 15. Folding & Packing Up The ZappBug Room Reverse steps 1-11 and store the ZappBug Room and Accessories in the two included carry bags. ©2014-2016 ZappBug. All rights reserved. Product specifications subject to change.
-
Page 17: Troubleshooting Tips
ZappBug’s expert staff are here to help! If you have any questions about ZappBug or are experiencing any issues, please don’t hesitate to give us a call (or email). Our experts are ready to assist Monday-Friday, 9 AM to 5 PM PST. -
Page 18: Warranty Information
How Do You Get Service if There is a Problem? Email us at service@zappbug.com or call us at (206) 430-5514. Tell us the problem and when and where you purchased the ZappBug Room . We will email you back with instructions on how to send us the ZappBug Room for repair or replacement. -
Page 19: To Learn More, Please Visit Us At Zappbug.com
This page is intentionally left blank To learn more, please visit us at ZappBug.com... - Page 20 ZappBug Customer Service service@zappbug.com (206) 430-5514 Experts are waiting to assist 9am-5pm Pacific, Monday-Friday. ©2014-2016 ZappBug. All rights reserved. Product specifications subject to change.
Need help?
Do you have a question about the Room and is the answer not in the manual?
Questions and answers