B-Timer Setup - Bauer Junior II-B-F01 Instruction Manual

Setup
To enter the setup for the different functions of the B-Timer
press the = and o keys on the display simultaneously for more
than 5 seconds from the cartridge number display (Fig. 21).
Filter symbol starts flashing (Fig. 23) indicating the setup
mode.
Under setup A the filter cartridge number is set. To change
cartridge type, press o key for 3 seconds, the number starts
flashing. Press the = key to select the correct number, press o
key to accept the new setting.
Numbers beginning with 999 require a
special adjustment:
Press o key for 3 seconds. Press the = key to select 999000, the
last 0 starts flashing. Press the = key to select the correct
number, then press o key: the second 0 will start flashing, pro­
ceed as above and finally adjust the 3rd 0 accordingly.
Pressing the = key, display changes to setup B for the delivery
setting. Filter symbol starts flashing (Fig. 24). To change deliv­
ery (in ltrs./min), press o key for 3 seconds, the 1st digit starts
flashing. Press the = key to select the correct number, press o
key to accept the new setting. Repeat procedure for the other
two digits
Pressing the = key again, display changes to setup C for the
pressure range setting. Filter symbol starts flashing (Fig. 25).
To change pressure, press o key for 3 seconds. Press the = key
to select the correct pressure (200, 300 or 200/300), press o
key to accept the new setting.
After finishing setup and fitting a new car­
tridge, the filter capacity has absolutely to
be reset, see "Reset" above.
Pressing the = key again, display changes to the menue for
adjusting the operating hours. Press o key for 2 seconds,
the last digit will start flashing. Press the = key to select the
correct number, then press o key etc., until all digits are set.
Then pressing the = key twice will lead back to the main
menue, Pressing the the = key and the o key gives the possi­
bility to readjust the hours again, if required.
16
Instruction Manual w Junior II
Fig. 23
Fig. 24
Fig. 25