Lock Inspection Systems MET 30+ Operating Manual page 40

Doc. Ref.No: Q875-0143/ENG
The recommended procedure in this mode is:
• At fixed time intervals, print reports from supervisor's menu.
• Clear reports.
• Clear product and reject counts.
8.1.2.1 Operator's Menu
The following is displayed from the operator's menu:
Selecting "Print" will result in a display as follows:
Press SELECT if the printer is connected and switched on.
8.1.2.2 Supervisor's Menu
Moving the cursor to 'R' on the supervisor's menu will result in a display as follows:
Selecting "Print report" will result in a display as follows:
Press SELECT if the printer is connected and switched on. When printing is
complete, the supervisor will be presented with the following display:
The key should be pressed to give the message "Clear records?
SELECT key pressed. The product and reject counts should then be cleared by
moving the cursor to the 'C' option, which will result in the following display:
File Name: Q875-0143 ENG Iss2 Met30+ Operating.doc
Issue 2
Met 30+ Operating Manual
Test Product
Exit
Print
Set up printer or PC
on port A <SELECT>
TPRCSrEDoex
Print Report
Set up printer or PC
on port A <SELECT>
Print report
Clear records? No
TPRCSrEDoex
Clear counts
12/01/10
Yes" and the
Page 38 of 58