Sony HT-SF200 Operating Instructions Manual page 16

1
Prepare two screws (not supplied)
that are suitable for the wall
mount holes on the rear of the Bar
Speaker.
More than 30 mm
Hole on the rear of the Bar Speaker
2
Stick WALL MOUNT TEMPLATE
(supplied) on a wall.
Center of the TV
Adhesive tape,
etc.
1
Align TV CENTER LINE () of
WALL MOUNT TEMPLATE with the
center line of your TV.
2
Align TV BOTTOM LINE () of
WALL MOUNT TEMPLATE with the
bottom of your TV, then stick
WALL MOUNT TEMPLATE on a
wall by using a commercially
available adhesive tape, etc.
16
GB
4 mm
5 mm
10 mm
WALL MOUNT
TEMPLATE
3
Fasten the screws into the marks
() on SCREW LINE () of WALL
MOUNT TEMPLATE as in the
illustration below.
200 mm 200 mm
Screws
5 mm to
6 mm
4
Remove WALL MOUNT TEMPLATE.
5
Attach the cushion pads
(supplied) below the holes on the
rear of the Bar Speaker.
Marks ()
Cushion
pad