Printing; Installing Flip Printing Software; Setting Up The Printer - Samsung Flip WM55H User Manual

Printing

To print, you must set up the Print Server
To set up the Print Server, the product and the printer you want and your PC must be connected
to the same network.
Flip Printing Software must be also installed on the PC connected.
" For information about how to connect to a network, see
" You can set up the Print Server at
" You can set Clock Set at → System
" The Flip Printing Software is available on its website
– http://displaysolutions.samsung.com
– http://www.samsung.com
" Devices that transfer files, such as virtual printers (PDF, XPS, One note, etc.) or fax
machines, are not supported, but only printers that can print actual paper are supported.
" For print paper size, only A4 is supported.
and the Clock Set.
'Connecting to a network'.
→ Connect → Print Server.
→ Time → Clock Set.

Installing Flip Printing Software

Follow the onscreen instructions to install Flip Printing Software.
" The installation takes about 10 minutes, and the time taken may vary depending on your PC
environment.
PC installation requirements
• Supported operating systems:
Windows 7(32/64 bit), Windows 10(32/64 bit)
" When installing the software, make sure that critical Windows updates are already
installed. Update Windows Update to the latest version before beginning the setup.
" For Windows 7, make sure that Service Pack 1 is already installed.

Setting up the printer

After the Flip Printing Software is installed, make the following settings on the product
onscreen menu.
Setting up automatically
1
Select → Connect menu.
2
Select Print Server → Connect to Server
Setting up manually
1
Select → Connect menu.
2
Select Print Server → Connect to Server
the PC where Flip Printing Software is installed.
→ Auto.
→ Manual, and then enter the Server IP address of
33