Toshiba DMF102XKU Owner's Manual page 5

The radio waves generated by the product may
negatively affect equipment, causing malfunction
and eventual accident. For details, follow the
instructions given by each airline.
f) If any nearby equipment experienced radio
interference or any other problem when the digital
media frame is used, turn off the digital media
frame power.
The radio waves generated by the product may
negatively affect nearby equipment, causing
malfunction and eventual accident.
NOTES AND INFOR
MATION
NOTES ON HANDLING
● Do not shock the LCD monitor. It may cause unit
damage and malfunction.
● When transporting the digital media frame, the
original shipping carton and packing materials
come in handy. For maximum protection, repack
the unit as it was originally packaged at the factory.
● Do not use volatile liquids, such as insect spray,
near the digital media frame. Do not leave rubber
or plastic products in contact with the digital media
frame for a long time. They will leave marks on the
fi nish.
● When the digital media frame is not in use, be
sure to turn off the power.
● If you do not use the digital media frame for a
long period, the unit may not function properly in
the future. Turn on and use the digital media frame
occasionally.
NOTES ON LOCATING
● When you place this digital media frame near
a TV, radio, or VCR, the playback picture may
become poor and the sound may be distorted. In
this case, move the digital media frame away from
the TV, radio, or VCR.
NOTES ON CLEANING
● Use a soft, dry cloth for cleaning. Do not use any
type of solvent, such as thinner and benzine, as
they may damage the surface of the digital media
frame.
● When cleaning the LCD monitor, use a soft, dry
cloth.
NOTES ON MOISTURE CONDENSATION
Moisture condensation damages the digital me-
dia frame. Please read the following carefully.
Moisture condensation occurs, for example, when
you pour a cold drink into a glass on a warm day.
Drops of water form on the outside of the glass.
In the same way, moisture may condense on the
internal parts of the digital media frame.
● Moisture condensation occurs during the
following cases.
- When you transport the digital media frame
-
directly from a cold place to a warm place.
- When you use the digital media frame in a room
where you just turned on the heater, or a place
where the cold air from the air conditioner directly
hits the unit.
- In summer, when you use the digital media frame
in a hot and humid place just after you move the
unit from an air conditioned room.
- When you use the digital media frame in a humid
place.
● Do not use the digital media frame when moisture
condensation may occur.
If you use the digital media frame in such a situ-
ation, it may damage memory cards and internal
parts. Remove the memory cards, connect the AC
adaptor, turn on the digital media frame, and leave
it for two or three hours. After two or three hours,
the digital media frame will have warmed up and
evaporated any moisture.