Package contents nova MW6 x 3 Ethernet cable x 1 Power adapter x 3 Quick installation guide x 1 Know your device WAN/LAN port LAN port DC power jack Reset Reset button...
Page 3
Connect a single nova unit 1. Power off your modem, and remove and reinstall its battery (if any). 2. Use the included Ethernet cable to connect a LAN port of your modem to the WAN port of any nova unit. 3.
Page 4
Install the Tenda WiFi app Download the Tenda WiFi app on your mobile device by searching for Tenda WiFi in App Store or Google Play or by scanning the following QR code. Then, install the app. Scan to download Tenda WiFi app...
Page 5
Connect the mobile device to the nova unit Go to the WiFi network list on your mobile device, select the SSID of the nova unit, and enter its password. The SSID and password are specified on the label of the nova unit. SSID: NOVA_XXXX Password:...
Page 6
Connect the nova unit to the Internet Run the Tenda WiFi app and follow the onscreen instructions to connect the nova unit to the internet. After the nova unit is connected to the internet, its LED should turn solid blue.
Connect the other nova units to the Internet 1. Place each nova unit: Less than 45 feet from another At an open area for best performance...
Page 8
2. Use the other included power adapters to connect the remaining nova units to power sources. 3. Wait about 1 minute until each nova unit's LED lights one of the following colors: Solid blue Good connection Solid yellow Fair connection Solid magenta Poor connection Solid red...
Page 9
DNS server addresses automatically. Q3: How can I change my SSID and password? A3: Perform step II to download and install the Tenda WiFi app, run the app, tap Settings in the lower-right corner, tap Wireless Settings, change your SSID and password, and tap Save.
RJ45 cable. Declaration of Conformity Hereby, SHENZHEN TENDA TECHNOLOGY CO. LTD. declares that the radio equipment type Mesh3 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.tendacn.com/en/service/download-cata-101.html...
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 12
Radiation Exposure Statement This device complies with FCC radiation exposure limits set forth for an uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this...
Page 13
RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. User has the choice to give his product to a competent recycling organization or to the retailer when he buys new electrical or electronic equipment.
Need help?
Do you have a question about the Nova MW6 and is the answer not in the manual?
Questions and answers