Table of Contents
Advertisement
SECTION 11: OPTIONAL FEATURES
3-Jaw Chuck Rotary Attachment
The 3-Jaw Chuck style rotary is an extremely versatile tool for marking and engraving cylindrical objects. It comes with a
variety of interchangeable components that make it easy to hold different sized and shaped cylinders. There are two basic
setups:
1. 3-Jaw Chuck
2. Fixture plates
This photo shows the basic setup with the 3-Jaw Chuck on the left
and the centering fixture on the right.
This photo shows the 3-Jaw Chuck style Rotary Attachment with the
large fixture plates installed.
Fixture Plates and Additional Components
The following fixture plates and additional components are included with all 3-Jaw Chuck Rotary Attachments
1. Small fixture plates (2 each)
2. Large fixture plates (2 each)
3. Idle-side centering fixture (1 each)
4. Plate spindle (1 each)
5. Plate fixture thumb screws (2 each)
6. 3-Jaw tightening pins (2 each)
7. 3" Lens for CO2 Fusion only. Always install
this 3" lens whenever using the 3-Jaw
Chuck style rotary in the CO2 Fusion. Use
the standard 2" lens for all non-3-Jaw Chuck Rotary jobs.
1
4
5
- 125 -
3-Jaw Chuck Rotary Attachment
2
3
6
7
Advertisement
Table of Contents
Need help?
Do you have a question about the Fusion M2 32 and is the answer not in the manual?
Questions and answers
laser not accepting print jobs how do I fix this