WF-2540 / WF-2530 / WF-2520 / WF-2510 / WF-2010 series
6.2.2 Securing the Paper Support/Paper Support Sub
Purpose
To prevent damaging the Paper Support/Paper Support Sub by the shock during transportation.
Risks if it is not performed
The Paper Support/Paper Support Sub will be scratched and the abrasion powder will be produced due to the
shock during transportation.
Preparation
Prepare two pieces of strong tape
Multifunction Printer
•
1) Length: 60 mm, width: 22 mm, fold one end 5 ± 2 mm.
•
2) Length: 50 mm, width: 22 mm, fold one end 5 ± 2 mm.
Singlefunction Printer (3 tapes)
•
Length: 80 mm, width: 16 mm, fold one end 5 ± 2 mm.
Method
Multifunction Printer
1. Attach the strong tape 1) to the position on the following diagram A and secure the Paper Support Sub.
2. Attach the strong tape 2) to the position on the following diagram B and secure the Paper Support.
Diagram B
Figure 6-3. Securing the Paper Support/Paper Support Sub (Multifunction Printer)
Appendix
Paper Support
Strong tape
Protection for Transportation
Diagram A
Folded ends
Housing Left
Revision B
Paper Support Sub
Folded ends
78
Confidential