Page 4
Equipment (The left picture shows UTZ-BX050A.) Inspection Cover 2: Turn the knob (2 pieces) and the screw (1 piece) and remove the Inspection Cover. Screw Knob For UTZ-BX025A/ 035A/ 050A For UTZ-BX080A/ BD100A Heat Exchange Heat Element Exchange Element Filter Filter 3: Remove the filter and the Heat Exchange Element.
Page 5
2. Method of remove the Motor Assembly 1: Remove the filter and the Heat Exchange Element. Grooved Rail Refer to the attached "Method of remove the Heat Exchange Element and the filter". 2: First remove the screw (1 piece) and then remove the Grooved Rail.
Page 6
6: Rotate the Motor ASSY around the axis. 7: Pull it out to the direction of arrow and put outside of product.
Page 7
3. Method of remove the parts of Electrical Equipment 1: First remove the screw (2 pieces) and then remove the cover of Electrical Equipment Box. Electrical Screw Equipment Capacitor 2: Inside of the Electrical Equipment Box. Main PCB 4. Method of remove the parts of Electrical Equipment Screw 1: Remove the wired connector and the screw (1 piece).
Page 8
1116, Suenaga, Takatsu-ku, Kawasaki 213-8502, Japan 0902G3629...