Connecting The Lan Cable; Connecting The Hdbase-T - Samsung SBB-MT User Manual

Connecting the LAN Cable

― Connecting parts may differ in different products.
RJ45

Connecting the HDBase-T

― Connecting parts may differ in different products.
― HDBase-T (Tx) transmits data from an external device to HDBase-T (Rx). Make sure to connect
them directly using a LAN cable.
― Data transmission is not available if HDBase-T (Rx) is connected to HDBase-T (Tx) through a
hub.
― HDBase-T works with unshielded twisted pair (UTP) or shielded twisted pair (STP) cables; but,
to ensure CE compliance, STP cables and STP Connectors are required. Shielded cable and
connectors are recommended to safeguard against unpredictable environmental electrical
noise which may impact performance. It is recommended to use an STP cable to maximize
performance. Using a UTP cable or patch may decrease performance.
HDBase-T (Rx)
HDBT IN
HDBT OUT
LAN Cable
SBB-MT
HDBase-T (Tx)
HDMI IN
HDMI OUT
HDMI OUT
HDMI OUT
26