Access To Software; Access To Zkaccess - ZKTeco U1000E User Manual

18~26dBm.
Wiegand Setting: Set the machine's wiegand output format.

Setting Wiegand Out Bytes: Sets the forward or reverse output of the machine's Wiegand

Data, and start output from the first few bytes.
 Read Tag Interval Time: Set the machine to read the card interval. Read card interval is the
time when from the card is read within the scope of the card to the card is left out of the
scope of the card to read the second time card.

6. Access to Software

RJ45 Connection
Connect the RJ45 port of the Standalone Terminal to the Ethernet port of the computer. The
machine supports access to ZKAccess 3.5.3 build 0009 and ZKBioSecurity 3.0.5.0 software.

6.1. Access to ZKAccess

Add Device:
1)
Search the Standalone Terminal

Click [Device] > [Search Panels], click [Start Search] to search the Standalone Terminal by TCP/IP.
Standalone Terminal
5