Dab; Manual Tuning - Panasonic SC-UA4 Operating Instructions Manual

Link mode
BLUETOOTH
You can change the link mode to suit the connection
type.
Preparation
If this system is connected to a Bluetooth
disconnect it (Z page 7).
1
Press [PLAY MENU] repeatedly to select
"LINK MODE".
2
Press [R, T] to select the mode and then press
[OK].
MODE 1 Emphasis on connectivity.
MODE 2 Emphasis on sound quality.
(default)
Note:
•
When enjoying video contents with this function, the video
and audio output may not be synchronized. In this case,
select "MODE 1".
•
Select "MODE 1" if the sound is interrupted.
█
Note on disc
• This system can play CD-R/RW with CD-DA or MP3
format content.
• Before playback, finalise the disc on the device it was
recorded on.
• Some CD-R/RW cannot be played because of the
condition of the recording.
█
Note on USB device
• This system does not guarantee connection with all
USB devices.
• This system supports USB 2.0 full speed.
• This system can support USB devices of up to 32 GB.
• Only FAT 12/16/32 file system is supported.
█
Note on MP3 file
• Files are defined as tracks and folders are defined as
albums.
• Tracks must have the extension ".mp3" or ".MP3".
• Tracks will not necessarily be played in the order you
recorded them.
• Some files can fail to work because of the sector size.
MP3 file on disc
• This system can access up to:
– 255 albums (including root folder)
– 999 tracks
– 20 sessions
• Disc must conform to ISO9660 level 1 or 2 (except for
extended formats).
MP3 file on USB device
• This system can access up to:
– 800 albums (including root folder)
– 8000 tracks
– 999 tracks in one album

DAB+

SC-UA4
Preparation
Press [RADIO/EXT-IN] repeatedly to select "DAB+".
Note:
® device,
If you select "DAB+" for the first time, the system will tune
automatically.

Manual tuning

1
Press [PLAY MENU] repeatedly to select
"MANUAL SCAN".
2
Press [R, T] to select the frequency block and
then press [OK].
If no station is detected, "SCAN FAILED" is shown.
Adjust the antenna and try again.
To tune automatically
1
Press [PLAY MENU] to select "AUTO SCAN" and
then press [OK].
"START?" is shown.
2
Press [OK] to start tuning.
"DAB AUTO SCAN" is shown.
If no station is detected, "SCAN FAILED" is shown.
Do manual tuning.
Note:
Preset frequencies are erased after you do automatic tuning.
Memory presetting
You can preset up to 20 stations.
1
Press [PLAY MENU] repeatedly to select
"TUNE MODE".
2
Press [R, T] to select "STATION" and then press
[OK].
3
Press [2/3] or [5/6] to tune in to the
station.
4
Press [OK].
5
Press [R, T] to select a preset number and then
press [OK].
Do steps 3 through 5 again to preset more stations.
The new station replaces any station that occupies
the same preset number.
Note:
You cannot preset a station when the station is not
broadcasting or when you have selected a secondary service.
█
Selecting a preset station
1
Press [PLAY MENU] repeatedly to select
"TUNE MODE".
2
Press [R, T] to select "PRESET" and then press
[OK].
3
Press [2/3] or [5/6] to select the preset
station.
9
9