Cleaning Reminder - AEG BSE774320M User Manual

42 www.aeg.com
2. Pull the front end of the shelf support
away from the side wall.
3. Pull the supports out of the rear
catch.
Install the shelf supports in the opposite
sequence.
12.4 Cleaning
CAUTION!
Remove all accessories.
Do not insert water in the
water tank during cleaning.
Filling the water tank during
the cycle will stop the
cleaning. After this
operation the cycle will start
from the beginning.
The cleaning procedure
cannot start:
• if you did not remove the core
temperature sensor plug from the
socket.
• if you did not fully close the oven
door.
CAUTION!
If there are other appliances
installed in the same
cabinet, do not use them
when the function Cleaning
operates. It can cause
damage to the appliance.
1. Turn on the oven and select from the
Cleaning menu the function
Cleaning. Press
2. Put the baking tray on the first shelf
position to collect water from the
water tank. Press
tank emptying procedure.
3. When the procedure ends remove all
accessories and the side grids.
Remove the remaining food
manually. Clean the inner side of the
door with hot water, so that the
residues do not burn from the hot air.
Press
4. Press
duration of the cleaning procedure:
to confirm.
to start water
to start Cleaning.
or to choose the
Option
Quick
Normal
Intense
Press to confirm.
To stop the pyrolytic
cleaning before it is
completed, turn off the
oven.
When the pyrolytic cleaning
starts, the oven door is
locked and the lamp does
not work.
After the pyrolytic cleaning
is finished, the door stays
locked for the cool down
phase. Some of the oven
functions are not available
during the cool down phase.
WARNING!
After the pyrolytic cleaning
is finished, the oven is very
hot. There is a risk of burns.
Let it cools down.

12.5 Cleaning Reminder

When reminder is displayed cleaning is
necessary. Perform the function Pyrolytic
Cleaning.
You can enable / disable the function:
Cleaning Reminder in the menu: Basic
Settings.
12.6 Steam generation system
- Descaling
When the steam generator operates,
limestone accumulates inside it (because
of calcium contents in the water). This
can have a negative effect on the steam
quality, on the performance of the steam
generator and on the food quality. To
prevent limestone accumulation, clean
the steam generation circuit.
Remove all accessories.
Description
1 h
1 h 30 min
3 h