About Your Cardiosport System 122 Digital Heart Rate Monitor; Quick Start - Zentan Technology Fusion 20 Manual

About your Cardiosport
System 122 Digital heart
rate monitor
The Cardiosport digital
telemetry technology utilises a
safe 122kHz low frequency
system designed to deliver
reliable coded heart rate
information, so all you have to
concentrate on is getting the
most from your exercise.
Each time you put on your
chest transmitter and then
press the MODE key until the
Heart symbol appears, a code
is randomly selected and
transmitted to the watch
receiver, thereafter the watch
will lock on to this code plus
the transmission interval to
create an interlock. The code
combined with the precise
transmission interval results in
the unique interlocking pairing
between the chest transmitter
and watch.
The interlock code can be
displayed by pressing and
holding down the scan/rev key
until the word CODE and a
number appears on the screen.
During the interlock process
you should be at least 6 feet
(1.8 metres) away from other
Cardiosport System 122 heart
rate monitors. If the interlock
is lost for any reason, the
watch will beep once to alert
you and the heart rate display
will go to Zero, in this case you
should repeat the interlock
process.
Once the interlock is
established, you can exercise in
close proximity with other
heart rate monitors safe in the
knowledge that your monitor
will display only your own heart
rate only, not the heart rate of
those around you.

Quick Start

Fusion 20/30 have a variety
of features. To set these up
you will need to read the
instructions. However, if you
just want to see how the heart
rate feature works, follow these
steps:
1 Put on the transmitter.
2 Attach the monitor to your
wrist.
3 Press and hold the MODE
key until the heart symbol
appears.
4