Fm Operation; Auto Scan; Scan Setting; Audio Setting - Hitachi KH335FMBE Instruction Manual

FM Operation

Auto Scan

To search for an FM station, press SCAN to start the auto
GB
scan. Once a station has been found, the scanning will stop
automatically.
With FM radio, it may be necessary to fine tune each station by
pressing
MHz. If reception is still poor, adjust the position of the aerial or try
moving the radio to another location.

Scan Setting

This is a scanning option to scan all stations, or just scan stations
with strong signal.
Press MENU and then
1.
to confirm.
2. Press
Press

Audio Setting

Press MENU and then
1.
to confirm.
2. Press
Press
The unit will automatically switch between stereo and mono when
<Stereo allowed> is selected depending on the signal strength, but
you can override this and switch this function manually. This is helpful
when receiving poor signal reception.
14
repeatedly. Each press will adjust the frequency by 0.05
to select <All stations> or <Strong stations only>.
to confirm.
to select <Stereo allowed> or <Forced Mono>.
to confirm.
to select <Scan setting>. Press
to select <Audio Setting>. Press