Oppo BDP-103 Manual

OPPO BDP-10X Blu-ray Disc Player
Network Remote Control Protocol
Note: This document describes a preliminary version of the network remote control
protocol for OPPO BDP-103/105/103D/105D players. This feature allows a network-
connected device such as a PC or a smartphone to control the OPPO Blu-ray player.
The OPPO Blu-ray player functions as a Server, which broadcasts the message, waits
and listens to the port(s), responses to the client's connection, receives the client's
commands and performs the action. The network device functions as a Client, which
receives and processes the broadcasting message, sets up the TCP connection with the
Server, and sends the control commands. In the remainder of this document, we use
"Server" for BDP-103/105/103D/105D players and "Client" for the network devices.
The commands and responses listed in this document require firmware version of:
•
BDP-103/105/103D/105D: Main firmware of BDP10x-79-0711 or newer, MCU
firmware of MCU103-05-0916 (BDP-103), MCU105-04-1113 (BDP-105),
MCU13D-01-0618 (BDP-103D), MCU15D-01-0930 (BDP-105D), DB10X 131030
(BDP-103D, 105D)
Please note the network remote control feature and protocol are still under development,
future revisions may not be compatible with this preliminary version, and you will need to
reprogram any controllers that use this version of protocol.
The complete client control procedure can be described in three sections: DISCOVER,
CONNECT and COMMAND.
1. DISCOVER
Once the Server is running, it will automatically broadcast the message every 10
seconds to notify any interested Client about its availability, as well as the IP address
and the port number which are required to establish the TCP connection. The Client
needs to receive this broadcasting message, extract the IP address and port number,
and establish the connection with the Server. Once the connection is done, the Client
should also discard any future broadcasting messages.
The address used for the Server's message broadcast is: 239.255.255.251:7624
The format of the broadcasting message is:
Notify:OPPO Player Start
Server IP:
Server Port:
For example:
Notify:OPPO Player Start
Server IP:192.168.0.2
Server Port:48360
2. CONNECT
1
OPPO Digital, Inc. • www.oppodigital.com