1. Manuals
  2. Brands
  3. Zanussi Manuals
  4. Dishwasher
  5. ZDF4010 X
  6. User manual

Zanussi ZDF4010 X User Manual

Hide thumbs Also See for ZDF4010 X:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
User manual
EN
Dishwasher
ZDF4010
X

Advertisement

Table of Contents
loading

Related Manuals for Zanussi ZDF4010 X

Summary of Contents for Zanussi ZDF4010 X

  • Page 1 User manual Dishwasher ZDF4010...

  • Page 2: Table Of Contents

    Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Loading cutlery and dishes _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Setting and starting a washing programme _ _ _ _ _ 11 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5...
  • Page 3 • Do not remove the dishes from the appliance until the Electrical connection washing programme is completed. • The appliance must be earthed. Care and cleaning • Make sure that the electrical information on the rating plate agrees with the power supply. •...

  • Page 4: Control Panel

    Control panel On/off button Indicators Programme buttons Display Delay start button Indicators Programme-progress indicator. It comes on when you set the washing programme and goes off when the washing programme is completed. End indicator. It comes on when the washing programme is completed. Multitab indicator.

  • Page 5: Washing Programmes

    Programme buttons • To cancel the washing programme in progress or a de- lay start in progress. Refer to 'Select and start a wash- Press one of these buttons to set a washing programme. ing programme'. The related indicator comes on. Refer to 'Washing pro- grammes'.

  • Page 6: Use Of The Appliance

    Programme Type of soil Type of load Programme description Use this programme to quickly rinse the dishes. Rinse This prevents the remaining food to bond on the dishes and bad odours to come out from the ap- pliance. Do not use detergent with this programme 1) The appliance senses the type of soil and the quantity of items in the baskets.
  • Page 7 Water hardness Water hardness adjustment German degrees French degrees (TH°) mmol/l Clarke degrees manually electron- (°dH) ically 51 - 70 91 - 125 9,1 - 12,5 64 - 88 43 - 50 76 - 90 7,6 - 9,0 53 - 63 37 - 42 65 - 75 6,5 - 7,5...

  • Page 8: Use Of Dishwasher Salt

    Use of dishwasher salt It is correct that water comes out from the salt con- tainer when you fill it with salt. Fill the salt container with 1 litre of water (only for the first time you fill with salt). Use of detergent and rinse aid Follow the detergent manufacturer recommendations on the detergent packaging.

  • Page 9: Multitab Function

    Different brands of detergent dissolve in different Fill the rinse aid dispenser with rinse aid. The times. Some detergent tablets do not have the best mark 'max' shows the maximum level. cleaning results during short washing programmes. Use Remove the spilled rinse aid with an absorbent cloth long washing programmes when you use the detergent to prevent too much foam during the washing pro- tablets to fully remove the detergent.
  • Page 10 • Make sure that the glasses do not touch other glasses. Use the cutlery grid. If the dimensions of the cutlery prevent use of the cutlery grid, you can easily re- • Put small items in the cutlery basket. move it. •...

  • Page 11: Setting And Starting A Washing Programme

    Do these steps to move the upper basket to the lower po- Caution! sition: • Do not lift or lower the basket on one side only. Pull the basket out until it stops. • If the basket is in the upper position, do not put cups on the cup racks.

  • Page 12: Care And Cleaning

    For better drying results, keep the appliance door Press one of the buttons (not the on/off button), the ajar for some minutes. display and the indicator lights come on again. • If you do not switch off the appliance, after three Remove the items from the baskets minutes from the end of the washing programme: •...
  • Page 13 With some malfunctions, the display shows an alarm • - The anti-flood device is on. code: Warning! Deactivate the appliance before you do the • - The appliance does not fill with water checks. • - The appliance does not drain the water Malfunction Possible cause Possible solution...
  • Page 14 The washing results and drying results are not satisfactory Problem Possible cause Possible solution The dishes are not clean. The selected washing programme Make sure that the washing pro- was not applicable for the type of gramme is applicable for the type of load and soil.

  • Page 15: Technical Data

    5. Press function button (B) to change the setting. The rinse aid dispenser is deactivated. 6. Deactivate the appliance to confirm. The rinse aid dispenser is activated. Technical data Dimensions Width 600 mm Height 850 mm Depth 610 mm Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum...
  • Page 16 To adjust the level of the appliance The drain hose extension must not be longer than 2 m. The internal diameter must not be smaller than the diame- A correct level of the appliance lets the door to close and ter of the hose.
  • Page 20 www.zanussi.com/shop...

Table of Contents