Related Manuals for Wilson Electronics Pro 70 Plus
Summary of Contents for Wilson Electronics Pro 70 Plus
- Page 1 Pro 70 Plus ™ Cellular Signal Booster Tech Support 866-294-1660 Need help? www.WilsonElectronics.com Mon.- Fri. Hours: 7 am to 6 pm MST...
-
Page 2: Table Of Contents
FAILURE TO DO THIS WILL VOID YOUR WARRANTY IN THE EVENT OF A POWER SURGE OR LIGHTNING STRIKE. Pro 70 Plus Band 12/17 & 13 (700 MHz), Band 5 (800 MHz), Band 4 (1700/2100 MHz), Band 25/2 ™ (1900 MHz) In-Building Wireless SmarTech ™ Signal Booster... -
Page 3: Package Contents
Package Contents Wide Band Directional Wide Band Panel Antenna 2’ RG11 Cable AC/DC Lightning Surge Pro 70 Plus ™ (951127) Antenna 75’ RG11 Cable 50’ RG11 Cable Power Supply Protector (470027) (314475-1175) 12V/3A (859900) (311155-1150) (859992) Appearance of device and accessories may vary. -
Page 4: Installation Details
Acceptable method: Check the bar www.wilsonelectronics.com/test- mode-instructions for help in finding indicator on your cell phone display the test mode for your phone. and note where the signal appears the strongest. (Note: cell phone bars b. The person on the roof should turn are only an approximation of signal the Outside Antenna 45 degrees strength and vary from phone to... -
Page 5: Quick Install
If you do not know how to mount “Inside Antenna” and run it to the hardware or run coax cable through Inside Antenna. NOTE: Be careful walls, ceilings and floors, get help from not to bend the center pins on a Wilson Certified Installer at www. -
Page 6: Inside Antenna Installation
Signal Boost by Booster input marked “POWER” and using a splitter (sold separately). then into a surge protector power strip Contact Wilson Electronics for more with a minimum 1000 Joule rating. information. Ensure a minimum of 20 feet vertical or 50 horizontal feet separation from the Outside Antenna. -
Page 7: Troubleshooting & Understanding Lights
If your coverage area is still too small the lights to be green on the bands you after separating the antennas contact plan to use. the Wilson Electronics Technical Support Team for assistance: 866-294- Red indicates the AG Pro 4G has 1660. -
Page 8: Additional Faq
Additional FAQ: What hours can I contact tech support? Technical Support can be reached from 7:00am to 6:00pm MST, by calling (866-294-1660), or by email, at tech@wilsonelectronics.com. How does weather affect the performance of my Outside Antenna? Water vapor (e.g. rain, fog, snow or other precipitation) creates an effective filter to cellular signal. - Page 9 Kit 311124-400100 • N-Male to F-Female adapter • 1900 MHz Yagi Directional Kit 311201-1120 • 100’ LMR400 Cable • Omni Directional w/ F-Female Kit 311129-400100 • 20’ RG11 Cable • 800 MHz Yagi Antenna Kit 311129-11110 • 100’ LMR400 Cable •...
-
Page 10: Safety Guidelines
Connecting the Signal Booster directly to the cell phone with use of an adapter will damage the cell phone. WARNING: Use only the power supply provided in this package. Use of a non-Wilson Electronics product may damage your equipment. WARNING: The Signal Booster unit is designed for use in an indoor, temperature-controlled environment (less than 150 degrees Fahrenheit). -
Page 11: Signal Booster Specifications
Signal Booster Specifications Model Number 460027 Connectors F-F emale Antenna Impedance 75 Ohms Frequency 698-716 MHz, 746-787 MHz, 824-894 MHz, 1850-1995 MHz, 1710-1755/2110-2155 MHz Band12/17 Band13 1700/2100 1900 Passband Gain (nominal) 56.0 55.2 58.9 60.7 60.7 Band12/17 Band13 1700/2100 1900 20 dB Bandwidth (MHz) Typical 29.9... - Page 12 Returned Material Authorization (RMA) number supplied by Wilson Electronics. Wilson Electronics shall, at its option, either repair or replace the product. Wilson Electronics will pay for delivery of the repaired or replaced product back to the original consumer if located within the continental U.S.
Need help?
Do you have a question about the Pro 70 Plus and is the answer not in the manual?
Questions and answers